- Online only
- New

Rif: 17146
Improper installation can be dangerous, consult a licensed professional and follow all applicable electrical codes during installation
Create your own fast charging line and take advantage of auxiliary batteries!
The Victron Energy Cyrix-ct consists of a microprocessor-controlled relay that automatically disconnects the batteries when the voltage drops below a certain value, and reconnects them when the voltage of either battery rises above a pre-set value.
The Cyrix-CT coupler fits conveniently between the starter battery and the lithium cell battery (diode to be added) or for the parallel installation of two lead-acid, AGM or Gel batteries.
Allows charging during operation up to 50 Ah.
For Euro 5 and earlier vehicles.
In a typical installation, the alternator is directly connected to the starter battery.
The service battery, or other consumers, are all connected to the starter battery via Cyrix battery combiners.
When a Cyrix detects that the starter battery has reached the connection voltage, it activates to allow the other batteries to be charged in parallel.
Product Type: Relay
Connection voltage: 13.0V
Disconnect voltage: 12.8V
Automatic detection of system voltage (12 or 24 V)
Maximum power: 120 A with continuous use / 180 A (5 seconds)
Weight: 0.11 kg
Net weight: 0.13 kg
Version: For acid, AGM or Gel batteries
Protection type: IP54
Connection bolts and connection cables: 13mm (M6)
Self-consumption: 12V= 220mA 24V= 120mA
Dimensions (WxHxD): 46 x 80 x 46 mm
You will immediately get a €10 discount
Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)
Shipping from €22.00 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.
Orders minimum £135, excluding shipping. Customs duties and taxes are the customer's responsibility.
Improper installation can be dangerous, consult a licensed professional and follow all applicable electrical codes during installation
Create your own fast charging line and take advantage of auxiliary batteries!
The Victron Energy Cyrix-ct consists of a microprocessor-controlled relay that automatically disconnects the batteries when the voltage drops below a certain value, and reconnects them when the voltage of either battery rises above a pre-set value.
The Cyrix-CT coupler fits conveniently between the starter battery and the lithium cell battery (diode to be added) or for the parallel installation of two lead-acid, AGM or Gel batteries.
Allows charging during operation up to 50 Ah.
For Euro 5 and earlier vehicles.
In a typical installation, the alternator is directly connected to the starter battery.
The service battery, or other consumers, are all connected to the starter battery via Cyrix battery combiners.
When a Cyrix detects that the starter battery has reached the connection voltage, it activates to allow the other batteries to be charged in parallel.
Product Type: Relay
Connection voltage: 13.0V
Disconnect voltage: 12.8V
Automatic detection of system voltage (12 or 24 V)
Maximum power: 120 A with continuous use / 180 A (5 seconds)
Weight: 0.11 kg
Net weight: 0.13 kg
Version: For acid, AGM or Gel batteries
Protection type: IP54
Connection bolts and connection cables: 13mm (M6)
Self-consumption: 12V= 220mA 24V= 120mA
Dimensions (WxHxD): 46 x 80 x 46 mm