- Agency
-
Accessories
-
Waterfall
- Aeration
-
Power
-
Thermal blinds
- PROMOTIONS
-
Air conditioning Heating
-
Kitchen
- Kitchen hoods
- Cooking
- Kitchen accessories
- Kitchen sinks
-
Refrigerators
- Fridge fans
- Dometic Trivalent Fridge
- Dometic Fridge Compressor
- INDELB refrigerators
- Thetford Tr / Comp fridge
- VITRIFRIGO refrigerators
- Aerators for refrigerators
-
Spare parts for refrigerators
- Fridge lighters
- Spare parts for Dometic refrigerators and grills
- Fridge nozzle burners
- Ignition candles fridge
- Fridge hinges
- Refrigerator closures
- Various for fridge
- Interrutt Selett fridge
- Knobs Fridge handles
- Fridge masks
- Shelves for Dometic fridge
- Resistors for fridge
- Fridge panels cards
- Fridge thermostats
- Refrigerator thermocouples
- Gas valves for refrigerators
- FRIGORIFERI A COMPRESSORE MESTIC
- Drains and siphons 1
-
Electricity
-
Cell exteriors
- Luggage box
- Locker door hinges
- Compressors
- Lockers and garages
- Steps
- Squeegee cleaning brushes
- Climbing and towing handles
- Bumpers
- Walls and blockers
-
External bike racks
- External gas bottle holders
- External motorcycle racks
- Roof rack
- East doors and mosquito nets
- Profiles and gaskets
- Rain protection DRIP STOP
- Remove black lines
- External ladders
- Folding roof
-
Verandas
-
Lighting
- Reflectors
- Post lights. trailers
- Auxiliary lights
- Decorative finishes
- Direction indicators
- Automotive bulbs
- Front clearance lights
- Side marker lights
- Rear clearance lights.
- Plate lights
- Front single modules
- Individual post forms
- Multifunction post. complete
- Multif. post. composib.
- Third stop
- Various lights
-
Gas
-
Lighting
-
Cell interior
- Mattresses and beds
-
Multimedia
-
Do it yourself workshop
- Outdoor
- External sockets and spare parts
-
Safety
-
Toilet
-
Vehicle
- External screen printing
- Car body
- Curtain carpet
-
External locks
- Varie
- OUTLET
-
Waterfall
- Spare parts
REDARC SMART START SBI 12V 100A
€119.00
VAT included
119
Rif: 15554
REDARC SMART START SBI 12V 100A - CE APPROVED
Get the most out of your batteries with dual battery isolatorsat the forefront of REDARC.
See the use and installation manual in the "attached documents".
The battery isolator is used primarily in 4WD and commercial vehicles and incorporates electronic components that prevent the solenoid from generating high voltage transients.
It is better than a diode battery isolator due to the voltage drop associated with diode type insulation.
It features low standby current draw and sophisticated fault detection and LED run indication to alert the user to faults including overvoltage conditions, voltage drop and excessive current draw.
The SBI12 Smart Start Battery Isolator is a safe way to charge a dual battery system.
PROMPT DELIVERY
FREE SHIPPING FOR THIS PRODUCT
The REDARC Smart Start® SBI12 is a 100A 12V microprocessor controlled battery isolator that protects the starter battery from excessive discharge while still allowing the auxiliary battery to provide charge to non-essential loads.
Description
REDARC Smart Start® SBI12 is a microprocessor controlled battery isolator that protects the starter battery from excessive discharge while allowing the auxiliary battery to provide charge to non-essential loads. It is used as the solenoid priority system in dual battery systems and provides 12V DC incorporating 100A continuous ratings. The SBI range manages battery charging for the secondary battery on the go.
Energy saving technology
The battery isolator is mostly used in 4WD and commercial vehicles. Incorporates electronic components that prevent the solenoid from generating high voltage transients. Due to the voltage drop associated with diode type insulation, it is better than a diode battery isolator. A low standby current draw, fault detection, and run LED indication alerts users to faults such as brownouts, overvoltage, and excessive current draw conditions. Safely keep your dual battery system charged with the SBI12 Smart Start Battery Isolator.
Fully protected against surges.
Characteristics:
- Dimensions: 75 x 60 x 80H
- Weight 200 g
- Maximum starting current 400A
- Activation voltage 13.2 - 12.7
Overprinted design
Compact size and easy to install
Silver contacts provide longer life and are suitable for marine applications
Energy saving technology
Fault indication
DISCOUNT - MAKE A PURCHASE OF AT LEAST €200
You will immediately get a €10 discount
ITALY - SHIPPING POLICIES
Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)
EUROPE - SHIPPING POLICIES
Shipping from €22.00 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.
UK - MINIMUM ORDER £135
Orders minimum £135, excluding shipping. Customs duties and taxes are the customer's responsibility.
-
Frequently purchased together
16 other products in the same category:
- -€26.00
- Out-of-Stock
000.325.02 - Nordelettronica NE325 - 40A Booster battery charger 12 V also...
€179.00
-€21.00
€158.00
Rif: 14319
- -€21.00
REDARC SMART START SBI 12V 100A - CE APPROVED
Get the most out of your batteries with dual battery isolatorsat the forefront of REDARC.
See the use and installation manual in the "attached documents".
The battery isolator is used primarily in 4WD and commercial vehicles and incorporates electronic components that prevent the solenoid from generating high voltage transients.
It is better than a diode battery isolator due to the voltage drop associated with diode type insulation.
It features low standby current draw and sophisticated fault detection and LED run indication to alert the user to faults including overvoltage conditions, voltage drop and excessive current draw.
The SBI12 Smart Start Battery Isolator is a safe way to charge a dual battery system.
PROMPT DELIVERY
FREE SHIPPING FOR THIS PRODUCT
The REDARC Smart Start® SBI12 is a 100A 12V microprocessor controlled battery isolator that protects the starter battery from excessive discharge while still allowing the auxiliary battery to provide charge to non-essential loads.
Description
REDARC Smart Start® SBI12 is a microprocessor controlled battery isolator that protects the starter battery from excessive discharge while allowing the auxiliary battery to provide charge to non-essential loads. It is used as the solenoid priority system in dual battery systems and provides 12V DC incorporating 100A continuous ratings. The SBI range manages battery charging for the secondary battery on the go.
Energy saving technology
The battery isolator is mostly used in 4WD and commercial vehicles. Incorporates electronic components that prevent the solenoid from generating high voltage transients. Due to the voltage drop associated with diode type insulation, it is better than a diode battery isolator. A low standby current draw, fault detection, and run LED indication alerts users to faults such as brownouts, overvoltage, and excessive current draw conditions. Safely keep your dual battery system charged with the SBI12 Smart Start Battery Isolator.
Fully protected against surges.
Characteristics:
- Dimensions: 75 x 60 x 80H
- Weight 200 g
- Maximum starting current 400A
- Activation voltage 13.2 - 12.7
Overprinted design
Compact size and easy to install
Silver contacts provide longer life and are suitable for marine applications
Energy saving technology
Fault indication
