Access pumps immers - line

The Submersible and Inline Pump Accessories category offers a range of essential components to improve and maintain the efficiency of your RV's water system. Here you will find water filters, check valves, fittings and switches, designed to optimize the operation of the pumps. Accessories such as the BARWIG filter and the check valve ensure long-lasting protection against impurities and malfunctions. Whether you are dealing with submersible or inline pumps, these components are essential for a reliable and trouble-free system.

Filters, valves and switches for pumps

Pump filters, such as the COMET or BARWIG models, offer effective protection against residues and impurities, extending the life of the pump. Non-return valves, available in various diameters and materials, ensure a stable water flow and prevent unwanted backflow. Membrane or foot switches, such as those from COMET, are perfect for precise and safe control. Fittings, such as those from 10 to 12.7 mm, ensure solid and versatile connections to adapt to different configurations. With the right accessories from PitStopCamper, your camper's water system will always be efficient and functional.

Automatic switch for immersion pump connection for taps
Access pumps immers - line

Automatic switch for immersion pump connection for taps

18301505
€18.00
Automatic switch immersion pump with connection for taps IN = Hose connection for pipe internal Ø 12 mm OUT = 3/8 "female connection NC microswitch contact
BARWIG diaphragm switch Ø 10 mm for press / immersion pumps BARWIG diaphragm switch Ø 10 mm for press / immersion pumps 2
Access pumps immers - line

BARWIG diaphragm switch Ø 10 mm for press / immersion pumps

61192
€18.50
BARWIG diaphragm switch Ø 10 mm for pressure and immersion pumps Required for the operation of submersible pumps as a water pressure detection system. Installation in a pressure hose after the pump. Switching power: max 15A Switching pressure 0.4 bar and 0.65 bar For tube Ø 10 mm Dimensions 40x100x165 mm
Battery box for immersion pumps Battery box for immersion pumps 2
Access pumps immers - line

Battery box for immersion pumps

0183031.06
€13.50
Battery box for immersion pumps
COMET - Pressure switch 0.8 bar for VIP pump - John Guest COMET - Pressure switch 0.8 bar for VIP pump - John Guest 2
Access pumps immers - line

COMET - Pressure switch 0.8 bar for VIP pump - John Guest

018 3002.02JG
€29.90
COMET - Pressure switch 0.8 bar for VIP pump - John Guest Mounting inside flexible pipe systems Connection: PE pipe external diam. 12 mm Closing pressure: 0.8 bar JG 12mm Female Inline Pressure Switch
COMET Submersible pump 12VDC - 20 lt per minute - JG... COMET Submersible pump 12VDC - 20 lt per minute - JG... 2
Immersion pumps

COMET Submersible pump 12VDC - 20 lt per minute - JG quick coupling

018 1440 12JG
€26.90
COMET Submersible pump 12VDC - 20 lt per minute - JG quick coupling Height 12.5 cm Length 4.5 cm Width 4.1 cm Consumption 3.75 A Input voltage 12 VDC Max water pressure 1.1 bar Minute flow rate 20 l
Filter for immersion pumps
Access pumps immers - line

Filter for immersion pumps

0183006.01
€5.00
Filtro per pompe a immersione
FILTER X IN LINE PUMPS JG 12 mm
Access pumps immers - line

FILTER X IN LINE PUMPS JG 12 mm

1830060112
€6.90
FILTER X IN LINE PUMPS JG 12 mm Brand JG Entry John Guest 12 mm Outlet for insertion into the pump shank Dimensions approximately 58 mm, diameter approximately 27 mm
Non-return valve for in-line pumps with JG connections Non-return valve for in-line pumps with JG connections 2
Access pumps immers - line

Non-return valve for in-line pumps with JG connections

018 3008.02.12
€10.90
Non-return valve for in-line pumps - JG connections for 12 mm diameter hose JG brand John Guest 12 mm entry and exit Size 65mm approx, diameter 27mm approx
Non-return valve for submersible pumps JG 12 mm
Access pumps immers - line

Non-return valve for submersible pumps JG 12 mm

1830045312
€7.50
NON-RETURN VALVE FOR IMMERSION PUMPS JG 12 mm Brand JG Entry John Guest 12 mm Outlet for insertion into the shank of the immersion pump Dimensions approximately 58 mm, diameter approximately 27 mm
Pressure switch 0.8 bar for immersed pumps pump connection Pressure switch 0.8 bar for immersed pumps pump connection 2
Access pumps immers - line

Pressure switch 0.8 bar for immersed pumps pump connection

018 3002.02
€19.90
Pressostato (Interruttore automatico a membrana) per pompe a immersione, montaggio sul tubo di mandata della pompa Pressione 0.8 bar IN = Attacco portagomma per tubo Ø interno 12 mm OUT = per tubo mandata della pompa ad immersione
R R 2
Access pumps immers - line

R

62065
€14.90
REICH Non-return valve for double motor submersible pumps such as TANDEM and TWIN This adapter has been designed for conversion from a quick-mount 12 mm hose (Uni-Quick) to a 10 mm hose hose (up to 14 mm).
Product added to wishlist