KEMPER AR-T3 solar batt ultrasonic moles chaser

GENERAL WARNINGS

1. Before each use, check that the appliance is not damaged, does not have any defective parts, and that there are no other conditions that could affect the functionality and safety of the appliance.

2. Remove the packing material and make sure the appliance is intact. If in doubt, do not use it and contact our after-sales service. Do not leave packaging materials, such as paper clips or blister packs, within the reach of children.

3. Do not immerse the product in liquid substances.

4. Do not insert any objects into the appliance.

5. The appliance must be used only for the purpose for which it is intended. Any other application is to be considered improper and therefore dangerous.

6. The manufacturer will not be held liable for damage caused by improper use of this appliance.

7. The appliance is made up of dangerous elements which must not be left within the reach of children.

8. The appliance can be used by children under the age of 8 and by people with reduced physical, sensory or mental abilities, or without experience or the necessary knowledge, as long as they are under supervision or after they have received relative instructions. to use the appliance safely and to understand the dangers inherent to it. Children must not play with the appliance. Cleaning and maintenance intended to be carried out by the user must not be carried out by unsupervised children.

9. In the event of malfunctions, switch off the appliance immediately and contact a service center. 10. THIS APPLIANCE IS NOT A TOY.

11. THE APPLIANCE IS INTENDED FOR EXTERNAL USE.

12. KEEP OUT OF REACH OF CHILDREN.

13. This appliance requires only the cleaning of the external surface, use only a soft damp cloth. Do not use solvents.

14. Do not place the product in places where there may be flammable vapors or explosive dust.

INSTALLATION

1) Check the ground surface before use. The device cannot be used on frozen, waterlogged ground and in marshes. The density of the soil greatly affects the effectiveness of the device. The more compact the soil, the greater the yield.

2) Connect the two cables together as shown in figure 1 and 2.

3) Make sure that the o-ring and the tube close perfectly (it is a greater safety against water) as shown in figure 3. 4) Assemble all the parts together as shown in the figure

4. The mole chaser starts working immediately.

5) Dig a hole and insert the mole chaser into the ground.

ATTENTION

Do not use hammers during the installation phase.

Do not use excessive force to drive the mole chaser into the ground.

The water level in the ground must not exceed the safety line (LS) indicated on the product as shown in figure 5. The mole chaser must be positioned as in the figure above (it must protrude from the ground for about 10 cm).