G.56 (35mm) to G2 (W21.8 X 1/14 LH) Clip-On Adapter

G.56 (35 mm) to G2 Clip-On Adapter (W20 X 1/14 LH - Italy)

Inlet G.56 diameter 35 mm for cylinders with a clip sampling valve, for example brands KOSAN GAS, REPSOL , CEPSA, AGA.

The adapter can be used for Clip-On G56 (35 mm) cylinders from the following countries:

Spain, Ireland, Portugal, England, Cyprus, Finland, Norway, Sweden, Denmark.

This high pressure adapter allows you to mount an HP pipe or a gas regulator with a left G.2 Italia system connection W20 X 1/14 LH.

Technical details:

• Height: 9.5cm
• Input: Clip-On (quick connection) Type G.56 - Diameter 35mm
• Outlet: German male thread M 20X1/14 LH and German female/Italy male thread connection W21.8 X 1/14 LH Italy. Make sure the rubber seal is fitted.
• Outlet pressure: unreduced free rise - a pressure regulator must be used!
• Approval: EN15202

How to use:

1. Make sure the red knob is in the "closed" position (to the right).
2. Insert the lower part of the adapter onto the cylinder valve, holding up the black ring that unlocks the steel balls with both hands.
3. Push down with both hands and release the lower black ring which will lock the locking balls.
4. Make sure that the connection has occurred correctly by lifting the cylinder which must remain connected to the adapter.
5. Connect the gas system pipe.
6. Open the red gas outlet knob (to the left).