RIC STEPS PROJECT2000

All spare parts in this category are professional items that can only be installed by specialized personnel or a qualified workshop. In case of purchase by private customers it is necessary that the identification of the spare part and the subsequent assembly take place with the support of the technician, so that the system on which it will be mounted is evaluated.

12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE 12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE

10232
€27.50
12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE Very easy to install, this device allows the step to automatically retract when the vehicle engine is started and prevents it from opening while driving. See also attached connection diagram.
12542 - 2020330815 CENTRALINA ELETTRONICA MULTIFUNZIONE 12542 - 2020330815 CENTRALINA ELETTRONICA MULTIFUNZIONE 2
Out-of-Stock
RIC STEPS PROJECT2000

12542 - 2020330815 CENTRALINA ELETTRONICA MULTIFUNZIONE

PRO424785-10231
€139.00
12542 - 308 MULTIFUNCTION ELECTRONIC CONTROL UNIT Multifunction electronic control unit to be applied to Project 2000 electric steps to make the step completely autonomous. Control unit with calibration 308 for Lippert / Project 2000 step models: 10750 (until 2013) 10751 10574P230 10574P280 10577 (up to serial number 000154406)....
View
185 ELECTRONIC MULTIFUNCTION CONTROL UNIT LIPPERT x 10750... 185 ELECTRONIC MULTIFUNCTION CONTROL UNIT LIPPERT x 10750... 2
Out-of-Stock
RIC STEPS PROJECT2000

185 ELECTRONIC MULTIFUNCTION CONTROL UNIT LIPPERT x 10750 after 2013

PRO425844
€138.00
CONTROL UNIT 12542 - 185 MULTIFUNCTION ELECTRONICS LIPPERT STEP 10750 AFTER 2013 Multifunction electronic control unit to be applied to the Project 2000 electric steps to make the step completely autonomous.
View
260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT FOR 10856... 260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT FOR 10856... 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT FOR 10856 - 10586 - 10574

PRO425313
€139.00
ELECTRONIC MULTIFUNCTIONAL STEP CALIBRATION CONTROL UNIT 260 FOR 10856 - 10586 - 10574 Multifunction electronic control unit to be applied to the Project 2000 electric steps to make the step completely autonomous. Control unit with 260 calibration for the Lippert / Project 2000 step model: 10856 10576 AFTER #000154407 10574
479495 Easy connection kit for Project 2000 steps 479495 Easy connection kit for Project 2000 steps 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

479495 Easy connection kit for Project 2000 steps

10551
€69.00
479495 Easy connection kit for Project 2000 steps Composed of: Connection cable already wired to the connector to be inserted in the electronic control unit Operation switch LED indicator 15 amp fuse holder Connection diagram
Anti-slip upper platform kit. for step 10574/53 PROJECT 2000 Anti-slip upper platform kit. for step 10574/53 PROJECT 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Anti-slip upper platform kit. for step 10574/53 PROJECT 2000

PRO424748
€59.00
Anti-slip upper platform kit for step 10574/53 PROJECT 2000 Point 2 of the exploded view 10574 Dimensions: Length 51 cm Width 20cm
Complete lower platform 574/527 P280 for step 10574... Complete lower platform 574/527 P280 for step 10574... 2
Out-of-Stock
RIC STEPS PROJECT2000

Complete lower platform 574/527 P280 for step 10574 PROJECT 2000

PRO425045
€119.00
Pedana inferiore completa 574/527 P280 per gradino 10574 PROJECT 2000 Punto 1 dell'esploso 10574
View
CONTROL UNIT 327 STEP 10576 BEFORE 000154406... CONTROL UNIT 327 STEP 10576 BEFORE 000154406... 2
Out-of-Stock
RIC STEPS PROJECT2000

CONTROL UNIT 327 STEP 10576 BEFORE 000154406 MULTIFUNCTION ELECTRONICS LIPPERT

PRO425217
€145.00
CONTROL UNIT 327 STEP 10576 BEFORE 000154406 MULTIFUNCTION ELECTRONICS LIPPERT Multifunction electronic control unit to be applied to the Project 2000 electric steps to make the step completely autonomous. Control unit with 327 calibration for the Lippert / Project 2000 step model: 10576 REGISTRATION NUMBER BEFORE 000154403
View
CROWN 11 TEETH CROWN 11 TEETH 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

CROWN 11 TEETH

PRO424454
€9.90
CORONA DENTATA 11 DENTI
D10 Snap Lock Pin Kit (856-066-0) PROJECT 2000 D10 Snap Lock Pin Kit (856-066-0) PROJECT 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

D10 Snap Lock Pin Kit (856-066-0) PROJECT 2000

PRO425815
€1.90
2-piece kit D10 pin with snap lock (856-066-0) PROJECT 2000
Door relay interrup NEW step closing limit switch 10576... Door relay interrup NEW step closing limit switch 10576... 2
Out-of-Stock
RIC STEPS PROJECT2000

Door relay interrup NEW step closing limit switch 10576 PROJECT 2000

PRO424858
€4.90
Staffetta porta interr NEW fine corsa chiusura gradino 10576 PROJECT 2000 Punto 3 dell'esploso 
View
DX + SX springs, step overturning 10574-5-6-7 PROJECT 2000 DX + SX springs, step overturning 10574-5-6-7 PROJECT 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

DX + SX springs, step overturning 10574-5-6-7 PROJECT 2000

PRO424802-3
€11.90
DX + SX springs, step overturning 10574-5-6-7 PROJECT 2000 Punto 6 e7  dell'esploso 10574 Punto 4 e 5 dell'esploso 10575 Punto 7 e 8 dell'esploso 10576 Punto 6 e 7 dell'esploso 10577 Nell'immagine è rappresentato il modello 10574 ma le molle sono sempre montate sul gruppo asta.
Electric motor for 10570, 10574, 10575,10220 for PROJECT... Electric motor for 10570, 10574, 10575,10220 for PROJECT... 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Electric motor for 10570, 10574, 10575,10220 for PROJECT 2000 steps

PRO424712
€175.00
Electric motor x 10570, 10574, 10575, 10577, 10220 for PROJECT 2000 steps Corresponds to point 2 of the attached drawing for step 10577 Also used in the left 10574 Also used in the 10575 right Used in 10570 steps type 40FD and 40FS  
Electric motor nosepiece x 10574-5-6 for PROJECT 2000 steps Electric motor nosepiece x 10574-5-6 for PROJECT 2000 steps 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Electric motor nosepiece x 10574-5-6 for PROJECT 2000 steps

PRO425297
€6.90
Nasello motore elettrico x 10574 - 10575 - 10576 per gradini PROJECT 2000 Punto 3 dell'esploso Tempo di consegna 10 giorni data ordine. Ø 20/27 mm ca Lunghezza 40 mm ca
ELECTRICAL WIRING FOR 10570 ELECTRICAL WIRING FOR 10570 2
Out-of-Stock
RIC STEPS PROJECT2000

ELECTRICAL WIRING FOR 10570

PRO446579
€15.90
CABLAGGIO ELETTRICO PER 10570
View
Extruded profile L 527 Lower platform for step 10574... Extruded profile L 527 Lower platform for step 10574... 2
Out-of-Stock
RIC STEPS PROJECT2000

Extruded profile L 527 Lower platform for step 10574 PROJECT 2000

PRO425145
€29.90
Profilo estruso L 527 Pedana inferiore per gradino 10574 PROJECT 2000 Punto 2 dell'esploso 10574
View
Galvanized hexagon 118x6V for step 10750-5500 Projet2000 Galvanized hexagon 118x6V for step 10750-5500 Projet2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Galvanized hexagon 118x6V for step 10750-5500 Projet2000

PRO424807
€5.90
Galvanized hexagon 118x6V for step 10750-5500 Projet2000 Internally threaded.
Galvanized lever support spring 574-044 Galvanized lever support spring 574-044 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Galvanized lever support spring 574-044

PRO425640
€9.00
Galvanized lever support spring 574-044
Gear for step motor 10750/10751 PROJECT 2000 Gear for step motor 10750/10751 PROJECT 2000 2
Out-of-Stock
RIC STEPS PROJECT2000

Gear for step motor 10750/10751 PROJECT 2000

PRO424727
€45.00
Plastic gear for motor 424719 (ex 424710) step 10750/10751 PROJECT 2000 Complete with mounting washers as standard. External diameter of teeth approx. 58 mm Shaft outer diameter approx. 10 mm Total height of the spare part approximately 63 mm Plastic gear with shaft and washer/shim kit to be assembled as per instructions. The image also shows...
View
Gruppo sostituzione leve 574-00 Gruppo sostituzione leve 574-00 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Gruppo sostituzione leve 574-00

PRO425644
€14.00
Project 2000 - Lippert - Step lever replacement unit 10574-00 before serial number 158044 Reference AE of the attached drawing. Used in: 48GD, 48GD030, 48GS, 48GS-030)
IT step 10750/10751 PROJECT 2000 gearmotor IT step 10750/10751 PROJECT 2000 gearmotor 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

IT step 10750/10751 PROJECT 2000 gearmotor

PRO424719
€189.00
Motoriduttore IT per gradino elettrico 10750/10751 PROJECT 2000 Albero Ø 10 mm filettato Corpo motore Ø 60 mm ca Lunghezza totale 155 mm ca Alimentazione 12 Vcc Peso 1.5 kg Completo di cablaggio 200 mm c.a.
Leaf springs for lower step PROJECT 2000 mod. 10576 Leaf springs for lower step PROJECT 2000 mod. 10576 2
Out-of-Stock
RIC STEPS PROJECT2000

Leaf springs for lower step PROJECT 2000 mod. 10576

PRO424780
€3.00
Molla a balestra di ribaltamento per gradino inferiore PROJECT 2000 mod. 10576 Punto 8 dell'esploso 
View
LED step lighting kit PROJECT 2000 - 12611 LED step lighting kit PROJECT 2000 - 12611 2
Out-of-Stock
RIC STEPS PROJECT2000

LED step lighting kit PROJECT 2000 - 12611

95960
€74.00
Kit illumnazione led gradini PROJECT 2000 art. 12611 con pedana in alluminio. Composto da: ✓ n° 1 striscia led di colore blu✓ n° 1 profilo di gomma trasparente antiscivolo✓ n° 1 temporizzatore Optional per i gradini prodotti da febbraio 2010. Per i gradini prodotti antecedentemente occorre sostituire tutta la pedana.
View
Left Engine Box step 10570, 10576, 10577 PROJECT 2000 Left Engine Box step 10570, 10576, 10577 PROJECT 2000 2
Out-of-Stock
RIC STEPS PROJECT2000

Left Engine Box step 10570, 10576, 10577 PROJECT 2000

PRO425219
€35.00
Left step motor box 10570, 10576, 10577 PROJECT 2000 Corresponds to point 5 of step 10576 Corresponds to point 4 of step 10577 The picture is of the right box but the left is supplied Black painted iron sheet Dimensions approximately 200 x 210 xh 105 mm
View
LIPPERT - ENDLESS SCREW FOR ART.12579 ( 579-018-0 ) LIPPERT - ENDLESS SCREW FOR ART.12579 ( 579-018-0 ) 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

LIPPERT - ENDLESS SCREW FOR ART.12579 ( 579-018-0 )

PRO424840
€34.90
LIPPERT - ENDLESS SCREW FOR ART.12579 ( 579-018-0 )
LIPPERT 2020330970 12512 control unit with 3 step... LIPPERT 2020330970 12512 control unit with 3 step... 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

LIPPERT 2020330970 12512 control unit with 3 step multifunction relays 10570-10571-...

PRO446575
€122.00
LIPPERT 2020330970Control unit 12512 with 3 step multifunction relays 10570-10571- 10575-10650 Turn electric steps into electronic ones. Without external adjustment. See attached wiring diagram
Lippert 479497 - Double push button electric switch with... Lippert 479497 - Double push button electric switch with... 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Lippert 479497 - Double push button electric switch with oval step plate 10576 - 10574...

10008
€33.00
Lippert 479497 - Commutatore elettrico a doppio pulsante on placca ovale per gradino 10576 - 10574 PROJECT 2000
LIPPERT Complete step motor group 10750/5 LIPPERT Complete step motor group 10750/5 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

LIPPERT Complete step motor group 10750/5

PRO425204
€198.00
LIPPERT Complete step motor group 10750/5 Opposite hand to our article 13532
LIPPERT CONTROL UNIT 080-30080-00 FOR NEW STEPS 10856... LIPPERT CONTROL UNIT 080-30080-00 FOR NEW STEPS 10856... 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

LIPPERT CONTROL UNIT 080-30080-00 FOR NEW STEPS 10856 VERSION V4

PRO426206
€85.00
LIPPERT CONTROL UNIT 080-30080-00 FOR NEW STEPS 10856 VERSION V4 Group consisting of: Control unit 080-30080-00 Wiring 080-00147 Adapter for 080-30080_AM
LIPPERT Drive shaft 856-057-01 LIPPERT Drive shaft 856-057-01 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

LIPPERT Drive shaft 856-057-01

PRO426012
€4.90
LIPPERT Drive shaft 856-057-01 8 teeth External diameter approx. 18.5 mm Hole diameter approx. 8 mm Height approx. 35 mm
LIPPERT engine for 12616 LIPPERT engine for 12616 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

LIPPERT engine for 12616

PRO425538
€109.00
LIPPERT engine for 12616
LIPPERT Step and door opening - closing control kit LIPPERT Step and door opening - closing control kit 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

LIPPERT Step and door opening - closing control kit

10550
€27.99
LIPPERT Step and door opening and closing control kit MULTIFUNCTION ELECTRONIC CONTROL UNIT VERS.3 424785 - 12542 Kit that combined with the control unit our article 12282 - Lippert 424785 allows you to synchronize the opening of the step with that of the door. Composed of: 12VDC Relay Relay holder socket Limit switch our article 12858
Lippert Step Front Mask 10856-550R V3 Lippert Step Front Mask 10856-550R V3 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Lippert Step Front Mask 10856-550R V3

PRO425970
€35.00
Lippert Step Front Mask 10856-550R V3 Total length 705mm Total height 110mm Black painted iron sheet
Lippert step left spring Lippert step left spring 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Lippert step left spring

PRO446595SX
€5.90
Lippert step left spring
LIPPERT STEP REDUCER KIT FOR SX MOTOR 425699 LIPPERT STEP REDUCER KIT FOR SX MOTOR 425699 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

LIPPERT STEP REDUCER KIT FOR SX MOTOR 425699

PRO425699
€79.00
LIPPERT STEP REDUCER KIT FOR SX MOTOR 425699
Product added to wishlist