Electric motor nosepiece x 10574-5-6 for PROJECT 2000 steps
Electric motor nosepiece x 10574-5-6 for PROJECT 2000 steps
Electric motor nosepiece x 10574-5-6 for PROJECT 2000 steps
Electric motor nosepiece x 10574-5-6 for PROJECT 2000 steps
Electric motor nosepiece x 10574-5-6 for PROJECT 2000 steps
Electric motor nosepiece x 10574-5-6 for...
Electric motor nosepiece x 10574-5-6 for...
Electric motor nosepiece x 10574-5-6 for...
Electric motor nosepiece x 10574-5-6 for...
Electric motor nosepiece x 10574-5-6 for...

Electric motor nosepiece x 10574-5-6 for PROJECT 2000 steps

Rif: 12296
5 days of preparation excluding made to order items
€6.90
VAT included
6.9
5 days of preparation excluding made to order items

Nasello motore elettrico x 10574 - 10575 - 10576 per gradini PROJECT 2000

Punto 3 dell'esploso

Tempo di consegna 10 giorni data ordine.

Ø 20/27 mm ca

Lunghezza 40 mm ca

  • TEM ON ORDER WITH DELIVERY TIME TO BE CONFIRMED BY THE MANUFACTURER.

  • The manufacturer's legal guarantee is valid.

  • See our G.C.S.

  DISCOUNT - MAKE A PURCHASE OF AT LEAST €200

You will immediately get a €10 discount

  ITALY - SHIPPING POLICIES

Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)

  UK - MIN ORDER £135 EXCL. SHIPPING

Customs duties and taxes are the customer's responsibility.

  EUROPE - SHIPPING POLICIES

Shipping from €14,90 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.

 

16 other products in the same category:

Left Engine Box step 10570, 10576, 10577 PROJECT 2000 Left Engine Box step 10570, 10576, 10577 PROJECT 2000 2
RIC STEPS PROJECT2000

Left Engine Box step 10570, 10576, 10577 PROJECT 2000

PRO425219
€35.00
Left step motor box 10570, 10576, 10577 PROJECT 2000 Corresponds to point 5 of step 10576 Corresponds to point 4 of step 10577 The picture is of the right box but the left is supplied Black painted iron sheet Dimensions approximately 200 x 210 xh 105 mm
Out-of-Stock
View
Lippert Step Front Mask 10856-550R V3 Lippert Step Front Mask 10856-550R V3 2
RIC STEPS PROJECT2000

Lippert Step Front Mask 10856-550R V3

PRO425970
€35.00
Lippert Step Front Mask 10856-550R V3 Total length 705mm Total height 110mm Black painted iron sheet
12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE 12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE 2
RIC STEPS PROJECT2000

12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE

10232
€27.50
12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE Very easy to install, this device allows the step to automatically retract when the vehicle engine is started and prevents it from opening while driving. See also attached connection diagram.
PLASTIC COVER FOR STEP PLATFORM 10570 PLASTIC COVER FOR STEP PLATFORM 10570 2
RIC STEPS PROJECT2000

PLASTIC COVER FOR STEP PLATFORM 10570

PRO446574
€86.00
PLASTIC COVER FOR STEP PLATFORM 10570 The same for both the upper and lower platforms. Point 3 of the attached drawing.
LIPPERT Drive shaft 856-057-01 LIPPERT Drive shaft 856-057-01 2
RIC STEPS PROJECT2000

LIPPERT Drive shaft 856-057-01

PRO426012
€4.90
LIPPERT Drive shaft 856-057-01 8 teeth External diameter approx. 18.5 mm Hole diameter approx. 8 mm Height approx. 35 mm
Out-of-Stock
View
479495 Easy connection kit for Project 2000 steps 479495 Easy connection kit for Project 2000 steps 2
RIC STEPS PROJECT2000

479495 Easy connection kit for Project 2000 steps

10551
€69.00
479495 Easy connection kit for Project 2000 steps Composed of: Connection cable already wired to the connector to be inserted in the electronic control unit Operation switch LED indicator 15 amp fuse holder Connection diagram
REDUCER 7: 1 PROJECT2000 MATR STEPS after 00154406 (EX... REDUCER 7: 1 PROJECT2000 MATR STEPS after 00154406 (EX... 2
RIC STEPS PROJECT2000

REDUCER 7: 1 PROJECT2000 MATR STEPS after 00154406 (EX 425128) PROJECT 2000

PRO425622
€74.00
RIDUTTORE 7:1 PER GRADINI PROJECT 2000 MATR dopo 00154406 (EX 425128) Solo riduttore senza staffa Dimensioni corpo: 60x80 mm circa Spessore corpo: 35 mm circa Quadro: 13x13 mm circa Interasse dei 4 fori 42x42 mm circa - 2 fori 50 mm circa
Out-of-Stock
View
Spare step lever 10575 Project 2000 Spare step lever 10575 Project 2000 2
RIC STEPS PROJECT2000

Spare step lever 10575 Project 2000

PRO425055
€11.90
Leva di ricambio gradino 10575 Project 2000 Utilizzata nel 53BD e 53BS Vedere riferimento F dell'esploso allegato. Dimensioni circa 16x3 mm lunghezza 200 mm ca Zincata bianca
Gear for step motor 10750/10751 PROJECT 2000 Gear for step motor 10750/10751 PROJECT 2000 2
RIC STEPS PROJECT2000

Gear for step motor 10750/10751 PROJECT 2000

PRO424727
€45.00
Plastic gear for motor 424719 (ex 424710) step 10750/10751 PROJECT 2000 Complete with mounting washers as standard. External diameter of teeth approx. 58 mm Shaft outer diameter approx. 10 mm Total height of the spare part approximately 63 mm Plastic gear with shaft and washer/shim kit to be assembled as per instructions. The image also shows...
RH + LH cut side panels group for PROJECT 2000 10574 step RH + LH cut side panels group for PROJECT 2000 10574 step 2
RIC STEPS PROJECT2000

RH + LH cut side panels group for PROJECT 2000 10574 step

PRO424753
€13.90
Gruppo fianchetti tagliati DX + SX per gradino PROJECT 2000 modello 10574 a 2 gradini Corrisponde al punto 5  dell'esploso allegato Il colore è solo indicativo
CONTROL UNIT 327 STEP 10576 BEFORE 000154406... CONTROL UNIT 327 STEP 10576 BEFORE 000154406... 2
RIC STEPS PROJECT2000

CONTROL UNIT 327 STEP 10576 BEFORE 000154406 MULTIFUNCTION ELECTRONICS LIPPERT

PRO425217
€145.00
CONTROL UNIT 327 STEP 10576 BEFORE 000154406 MULTIFUNCTION ELECTRONICS LIPPERT Multifunction electronic control unit to be applied to the Project 2000 electric steps to make the step completely autonomous. Control unit with 327 calibration for the Lippert / Project 2000 step model: 10576 REGISTRATION NUMBER BEFORE 000154403
Out-of-Stock
View
LIPPERT engine for 12616 LIPPERT engine for 12616 2
RIC STEPS PROJECT2000

LIPPERT engine for 12616

PRO425538
€109.00
LIPPERT engine for 12616
Motor unit with DX release NEW ex 425133 ex 425700 step... Motor unit with DX release NEW ex 425133 ex 425700 step... 2
RIC STEPS PROJECT2000

Motor unit with DX release NEW ex 425133 ex 425700 step PROJECT 2000 10575

PRO425628
€264.00
Gruppo motore con sgancio DX NEW ex 425133 ex 425700 gradino PROJECT 2000 10575 Corrisponde al punto 6  dell'esploso allegato SU ORDINAZIONE - TEMPO DI CONSEGNA 15 GIORNI
Leaf springs for lower step PROJECT 2000 mod. 10576 Leaf springs for lower step PROJECT 2000 mod. 10576 2
RIC STEPS PROJECT2000

Leaf springs for lower step PROJECT 2000 mod. 10576

PRO424780
€3.00
Molla a balestra di ribaltamento per gradino inferiore PROJECT 2000 mod. 10576 Punto 8 dell'esploso 
Out-of-Stock
View
Product added to wishlist