12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE
12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE
12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE
12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE
12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE
12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE

12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE

Rif: 13467
5 days of preparation excluding made to order items
€27.50
VAT included
27.5
5 days of preparation excluding made to order items

12531 PROJECT2000 AUTOMATIC STEP RETURN DEVICE

Very easy to install, this device allows the step to automatically retract when the vehicle engine is started and prevents it from opening while driving.

See also attached connection diagram.

  • TEM ON ORDER WITH DELIVERY TIME TO BE CONFIRMED BY THE MANUFACTURER.

  • The manufacturer's legal guarantee is valid.

  • See our G.C.S.

 
10232
1 Item

16 other products in the same category:

RH ENGINE GROUP FOR 10576 RH ENGINE GROUP FOR 10576 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

RH ENGINE GROUP FOR 10576

pro425619
€269.00
RIGHT MOTOR UNIT FOR 10576 - 425619 Replaces the 425189 Consisting of the AD gearbox + assembled A-motor
12542 - 2020330815 CENTRALINA ELETTRONICA MULTIFUNZIONE 12542 - 2020330815 CENTRALINA ELETTRONICA MULTIFUNZIONE 2
Out-of-Stock
RIC STEPS PROJECT2000

12542 - 2020330815 CENTRALINA ELETTRONICA MULTIFUNZIONE

PRO424785-10231
€139.00
12542 - 308 MULTIFUNCTION ELECTRONIC CONTROL UNIT Multifunction electronic control unit to be applied to Project 2000 electric steps to make the step completely autonomous. Control unit with calibration 308 for Lippert / Project 2000 step models: 10750 (until 2013) 10751 10574P230 10574P280 10577 (up to serial number 000154406)....
View
Reducer upgrade group + left step bracket 10574-6 PROJECT... Reducer upgrade group + left step bracket 10574-6 PROJECT... 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Reducer upgrade group + left step bracket 10574-6 PROJECT 2000 (if matr. Before 000154407)

PRO425618
€96.00
Gruppo aggiornamento riduttore + staffa SX per  gradino 10574 - 10576  PROJECT 2000 - se matr. minore di 000154407 Punto 4 dell'esploso
NEW PROJECT 2000 bed and step limit switch NEW PROJECT 2000 bed and step limit switch 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

NEW PROJECT 2000 bed and step limit switch

PRO479499
€8.90
Interruttore NUOVO TIPO fine corsa chiusura gradino 10574 - 10575 - 10576 e letto basculante PROJECT 2000  Punto 4 dell'esploso 10576 a 3 gradini Adatto anche per il 10574 e 10575 a 2 gradini Adatto anche per single step 10856 (Used in : 100R-V3, 400R-V4, 440R-V1, 440R-V3, 440R-V3-018, 440R-V3-032, 550R-V1, 550R-V2, 550R-V3, 550R-V4, 550R-V5,...
Gruppo sostituzione leve 574-00 Gruppo sostituzione leve 574-00 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Gruppo sostituzione leve 574-00

PRO425644
€14.00
Project 2000 - Lippert - Step lever replacement unit 10574-00 before serial number 158044 Reference AE of the attached drawing. Used in: 48GD, 48GD030, 48GS, 48GS-030)
Extruded profile L 527 Lower platform for step 10574... Extruded profile L 527 Lower platform for step 10574... 2
Out-of-Stock
RIC STEPS PROJECT2000

Extruded profile L 527 Lower platform for step 10574 PROJECT 2000

PRO425145
€29.90
Profilo estruso L 527 Pedana inferiore per gradino 10574 PROJECT 2000 Punto 2 dell'esploso 10574
View
Motor Unit + Step Reducer 10571 Project 2000 Motor Unit + Step Reducer 10571 Project 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Motor Unit + Step Reducer 10571 Project 2000

PRO425348
€184.00
Motor + Step Reducer Assembly 10571 Project 2000 Corresponds to item k in the attached drawing Opposite hand to our item 17147 ON ORDER DELIVERY TIME 10 DAYS APPROX
Electric motor for 10570, 10574, 10575,10220 for PROJECT... Electric motor for 10570, 10574, 10575,10220 for PROJECT... 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Electric motor for 10570, 10574, 10575,10220 for PROJECT 2000 steps

PRO424712
€175.00
Electric motor x 10570, 10574, 10575, 10577, 10220 for PROJECT 2000 steps Corresponds to point 2 of the attached drawing for step 10577 Also used in the left 10574 Also used in the 10575 right Used in 10570 steps type 40FD and 40FS  
Step tension spring 12473 from 440 Project 2000 Step tension spring 12473 from 440 Project 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Step tension spring 12473 from 440 Project 2000

PRO424767
€11.50
Galvanized traction spring step 12473 from 440 Project 2000 Corresponds to point F of the attached drawing Spring outer diameter 20 mm Steel wire diameter 2.5 mm Total length 88 mm Total 18 turns1
ROD 10576-527 P230 L604 MM PROJECT2000 ROD 10576-527 P230 L604 MM PROJECT2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

ROD 10576-527 P230 L604 MM PROJECT2000

PRO425117
€96.00
REPLACEMENT ROD FOR MOBILE STEP 10576-527 - P230 L=604 MM PROJECT2000 Made to order, delivery time approximately 10 days. Ask for confirmation before purchasing.
Complete lower platform 574/527 P280 for step 10574... Complete lower platform 574/527 P280 for step 10574... 2
Out-of-Stock
RIC STEPS PROJECT2000

Complete lower platform 574/527 P280 for step 10574 PROJECT 2000

PRO425045
€119.00
Pedana inferiore completa 574/527 P280 per gradino 10574 PROJECT 2000 Punto 1 dell'esploso 10574
View
Right motor box step 10570 PROJECT 2000 Right motor box step 10570 PROJECT 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Right motor box step 10570 PROJECT 2000

PRO446570
€34.00
Right step motor box 10570 - 10575 PROJECT 2000 Black painted sheet iron Dimensions 200 x 210 x h 105 mm approx Corresponds to point Q of 10570 Corresponds to point AG of 10575
PROJECT 2000 rectangular step bumper PROJECT 2000 rectangular step bumper 2
Out-of-Stock
RIC STEPS PROJECT2000

PROJECT 2000 rectangular step bumper

PRO425161
€0.75
Paracolpo rettangolare gradino PROJECT 2000 Dimensioni del paracolpo 10x15 mm circa Diametro gambo Ø 6 x 8 mm Altezza totale 13 mm circa
View
Tension springs step 10576 PROJECT 2000 after matr. 158043 Tension springs step 10576 PROJECT 2000 after matr. 158043 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Tension springs step 10576 PROJECT 2000 after matr. 158043

PRO425635
€6.90
Molle a trazione gradino 10576 PROJECT 2000  dopo matr. 158043 Punto 11 dell'esploso 
CROWN 11 TEETH CROWN 11 TEETH 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

CROWN 11 TEETH

PRO424454
€9.90
CORONA DENTATA 11 DENTI
CONTROL UNIT 327 STEP 10576 BEFORE 000154406... CONTROL UNIT 327 STEP 10576 BEFORE 000154406... 2
Out-of-Stock
RIC STEPS PROJECT2000

CONTROL UNIT 327 STEP 10576 BEFORE 000154406 MULTIFUNCTION ELECTRONICS LIPPERT

PRO425217
€145.00
CONTROL UNIT 327 STEP 10576 BEFORE 000154406 MULTIFUNCTION ELECTRONICS LIPPERT Multifunction electronic control unit to be applied to the Project 2000 electric steps to make the step completely autonomous. Control unit with 327 calibration for the Lippert / Project 2000 step model: 10576 REGISTRATION NUMBER BEFORE 000154403
View
Product added to wishlist