LIPPERT Drive shaft 856-057-01
LIPPERT Drive shaft 856-057-01
LIPPERT Drive shaft 856-057-01
LIPPERT Drive shaft 856-057-01
LIPPERT Drive shaft 856-057-01
LIPPERT Drive shaft 856-057-01
LIPPERT Drive shaft 856-057-01
LIPPERT Drive shaft 856-057-01

LIPPERT Drive shaft 856-057-01

Rif: 17580
5 days of preparation excluding made to order items
€4.90
VAT included
4.9
5 days of preparation excluding made to order items

LIPPERT Drive shaft 856-057-01

8 teeth

External diameter approx. 18.5 mm

Hole diameter approx. 8 mm

Height approx. 35 mm

  • TEM ON ORDER WITH DELIVERY TIME TO BE CONFIRMED BY THE MANUFACTURER.

  • The manufacturer's legal guarantee is valid.

  • See our G.C.S.

 
PRO426012
1 Item

16 other products in the same category:

Motor unit for step 10750 Lippert Motor unit for step 10750 Lippert 2
Out-of-Stock
RIC STEPS PROJECT2000

Motor unit for step 10750 Lippert

PRO425755
€146.00
Motor unit for 10750 RT REVERSE step. 2 PRINCIPLES - Lippert - Project 2000 Corresponds to point 6 of the attached drawing. Used in versions 350S, 440R, 440R-001, 440S, 440S-018, 440T, 500T, 550R, 550S, 550S-001, 580S-018, 600S-016, 700R, 700S, 700T ON ORDER DELIVERY TIME ABOUT 10 DAYS
View
260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT FOR 10856... 260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT FOR 10856... 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT FOR 10856 - 10586 - 10574

PRO425313
€139.00
ELECTRONIC MULTIFUNCTIONAL STEP CALIBRATION CONTROL UNIT 260 FOR 10856 - 10586 - 10574 Multifunction electronic control unit to be applied to the Project 2000 electric steps to make the step completely autonomous. Control unit with 260 calibration for the Lippert / Project 2000 step model: 10856 10576 AFTER #000154407 10574
DX + SX springs, step overturning 10574-5-6-7 PROJECT 2000 DX + SX springs, step overturning 10574-5-6-7 PROJECT 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

DX + SX springs, step overturning 10574-5-6-7 PROJECT 2000

PRO424802-3
€11.90
DX + SX springs, step overturning 10574-5-6-7 PROJECT 2000 Punto 6 e7  dell'esploso 10574 Punto 4 e 5 dell'esploso 10575 Punto 7 e 8 dell'esploso 10576 Punto 6 e 7 dell'esploso 10577 Nell'immagine è rappresentato il modello 10574 ma le molle sono sempre montate sul gruppo asta.
Pair of conical bumpers 19x13x18 for PROJECT 2000 step 12473 Pair of conical bumpers 19x13x18 for PROJECT 2000 step 12473 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Pair of conical bumpers 19x13x18 for PROJECT 2000 step 12473

PRO424808
€2.90
Coppia paracolpi troncoconici 19x13x18 per gradino PROJECT 2000 12473 - Punto 2 dell'eploso.
185 ELECTRONIC MULTIFUNCTION CONTROL UNIT LIPPERT x 10750... 185 ELECTRONIC MULTIFUNCTION CONTROL UNIT LIPPERT x 10750... 2
Out-of-Stock
RIC STEPS PROJECT2000

185 ELECTRONIC MULTIFUNCTION CONTROL UNIT LIPPERT x 10750 after 2013

PRO425844
€138.00
CONTROL UNIT 12542 - 185 MULTIFUNCTION ELECTRONICS LIPPERT STEP 10750 AFTER 2013 Multifunction electronic control unit to be applied to the Project 2000 electric steps to make the step completely autonomous.
View
Rod group L 604 mm step PROJECT 2000 mod. 10575 Rod group L 604 mm step PROJECT 2000 mod. 10575 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Rod group L 604 mm step PROJECT 2000 mod. 10575

PRO425073
€56.00
Rod assembly L 604 mm step PROJECT 2000 model 10575 It corresponds to point 7 of the exploded view attached step 10575
Gear for step motor 10750/10751 PROJECT 2000 Gear for step motor 10750/10751 PROJECT 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Gear for step motor 10750/10751 PROJECT 2000

PRO424727
€45.00
Plastic gear for motor 424719 (ex 424710) step 10750/10751 PROJECT 2000 Complete with mounting washers as standard. External diameter of teeth approx. 58 mm Shaft outer diameter approx. 10 mm Total height of the spare part approximately 63 mm Plastic gear with shaft and washer/shim kit to be assembled as per instructions. The image also shows...
Galvanized hexagon 118x6V for step 10750-5500 Projet2000 Galvanized hexagon 118x6V for step 10750-5500 Projet2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Galvanized hexagon 118x6V for step 10750-5500 Projet2000

PRO424807
€5.90
Galvanized hexagon 118x6V for step 10750-5500 Projet2000 Internally threaded.
Step spring assembly 10750 for PROJECT 2000 Step spring assembly 10750 for PROJECT 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Step spring assembly 10750 for PROJECT 2000

PRO425792
€12.00
Gruppo molla gradino 10750 PROJECT 2000 - Punto 1 dell'esploso
TORSION SPRING LEFT WIRE D. 2.5 STEP 10750 LIPPERT TORSION SPRING LEFT WIRE D. 2.5 STEP 10750 LIPPERT 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

TORSION SPRING LEFT WIRE D. 2.5 STEP 10750 LIPPERT

PRO424798
€5.90
TORSION SPRING LEFT WIRE D. 2.5 STEP 10750 PROJECT2000 - LIPPERT
Rod 10574-527 P280 L 604 mm step overturning PROJECT 2000 Rod 10574-527 P280 L 604 mm step overturning PROJECT 2000 2
Out-of-Stock
RIC STEPS PROJECT2000

Rod 10574-527 P280 L 604 mm step overturning PROJECT 2000

PRO425009
€44.50
Asta 10574-527 P280 L=604 mm ribaltamento gradino PROJECT 2000 Punto 4  dell'esploso 10574
View
LIPPERT - ENDLESS SCREW FOR ART.12579 ( 579-018-0 ) LIPPERT - ENDLESS SCREW FOR ART.12579 ( 579-018-0 ) 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

LIPPERT - ENDLESS SCREW FOR ART.12579 ( 579-018-0 )

PRO424840
€34.90
LIPPERT - ENDLESS SCREW FOR ART.12579 ( 579-018-0 )
Step tension spring 12473 from 440 Project 2000 Step tension spring 12473 from 440 Project 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Step tension spring 12473 from 440 Project 2000

PRO424767
€11.50
Galvanized traction spring step 12473 from 440 Project 2000 Corresponds to point F of the attached drawing Spring outer diameter 20 mm Steel wire diameter 2.5 mm Total length 88 mm Total 18 turns1
Motor Unit + Step Reducer 10571 Project 2000 Motor Unit + Step Reducer 10571 Project 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Motor Unit + Step Reducer 10571 Project 2000

PRO425348
€184.00
Motor + Step Reducer Assembly 10571 Project 2000 Corresponds to item k in the attached drawing Opposite hand to our item 17147 ON ORDER DELIVERY TIME 10 DAYS APPROX
Step rod 10570 DX-SX Project 2000 - 484 mm Step rod 10570 DX-SX Project 2000 - 484 mm 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Step rod 10570 DX-SX Project 2000 - 484 mm

PRO425183
€56.00
Asta gradino 10570 DX-SX Project 2000 Lunghezza: 484 mm Corrisponde alla lettera A del disegno allegato. Tempo di consegna 10/15 giorni
Electric motor nosepiece x 10574-5-6 for PROJECT 2000 steps Electric motor nosepiece x 10574-5-6 for PROJECT 2000 steps 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Electric motor nosepiece x 10574-5-6 for PROJECT 2000 steps

PRO425297
€6.90
Nasello motore elettrico x 10574 - 10575 - 10576 per gradini PROJECT 2000 Punto 3 dell'esploso Tempo di consegna 10 giorni data ordine. Ø 20/27 mm ca Lunghezza 40 mm ca
Product added to wishlist