260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT FOR 10856 - 10586 - 10574
260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT FOR 10856 - 10586 - 10574
260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT FOR 10856 - 10586 - 10574
260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT...
260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT...
260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT...

260 STEP ELECTRONIC MULTIFUNCTION CONTROL UNIT FOR 10856 - 10586 - 10574

Rif: 15276
5 days of preparation excluding made to order items
€144.00
VAT included
144
5 days of preparation excluding made to order items

ELECTRONIC MULTIFUNCTIONAL STEP CALIBRATION CONTROL UNIT 260 FOR 10856 - 10586 - 10574

Multifunction electronic control unit to be applied to the Project 2000 electric steps to make the step completely autonomous.

Control unit with 260 calibration for the Lippert / Project 2000 step model:

  • 10856

  • 10576 AFTER #000154407

  • 10574

  • TEM ON ORDER WITH DELIVERY TIME TO BE CONFIRMED BY THE MANUFACTURER.

  • The manufacturer's legal guarantee is valid.

  • See our G.C.S.

  DISCOUNT - MAKE A PURCHASE OF AT LEAST €200

You will immediately get a €10 discount

  ITALY - SHIPPING POLICIES

Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)

  UK - MIN ORDER £135 EXCL. SHIPPING

Customs duties and taxes are the customer's responsibility.

  EUROPE - SHIPPING POLICIES

Shipping from €14,90 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.

 

16 other products in the same category:

Gear for step motor 10750/10751 PROJECT 2000 Gear for step motor 10750/10751 PROJECT 2000 2
RIC STEPS PROJECT2000

Gear for step motor 10750/10751 PROJECT 2000

PRO424727
€45.00
Plastic gear for motor 424719 (ex 424710) step 10750/10751 PROJECT 2000 Complete with mounting washers as standard. External diameter of teeth approx. 58 mm Shaft outer diameter approx. 10 mm Total height of the spare part approximately 63 mm Plastic gear with shaft and washer/shim kit to be assembled as per instructions. The image also shows...
Reducer upgrade group + left step bracket 10574-6 PROJECT... Reducer upgrade group + left step bracket 10574-6 PROJECT... 2
RIC STEPS PROJECT2000

Reducer upgrade group + left step bracket 10574-6 PROJECT 2000 (if matr. Before 000154407)

PRO425618
€96.00
Gruppo aggiornamento riduttore + staffa SX per  gradino 10574 - 10576  PROJECT 2000 - se matr. minore di 000154407 Punto 4 dell'esploso
NC closing limit switch for PROJECT 2000 step 12473, 10750 NC closing limit switch for PROJECT 2000 step 12473, 10750 2
RIC STEPS PROJECT2000

NC closing limit switch for PROJECT 2000 step 12473, 10750

PRO425794
€5.90
Interruttore fine corsa  chiusura NC per gradino PROJECT 2000 12473 - Punto 1 dell'eploso. 10750 - Punto 5 dell'esploso 1)Rate Current Voltage: 2.5A 250VAC;5A  125VAC 2)Contact Resistance: ≤50ΜΩ 3)Insulation Resistance: ≥100ΜΩ 4)Dielectric Intensity 1500 VAC/min 5)Working life: 50,000 cylces
t t 2
RIC STEPS PROJECT2000

t

PRO446595DX
€5.90
Lippert right step spring
NON-SLIP FOOTBOARD KIT STEP 10750/550 PROJECT2000 NON-SLIP FOOTBOARD KIT STEP 10750/550 PROJECT2000 2
RIC STEPS PROJECT2000

NON-SLIP FOOTBOARD KIT STEP 10750/550 PROJECT2000

PRO425296
€69.00
KIT PEDANA ANTISCIVOLO GRADINO 10750/550 PROJECT2000 Composto da: Profilo alluminio con guarnizioni antiscivolo Laterali destro e sinistro in materiale plastico Viteria di montaggio
Steel pins for steps Project 2000 ex 446586 Steel pins for steps Project 2000 ex 446586 2
RIC STEPS PROJECT2000

Steel pins for steps Project 2000 ex 446586

PRO425696
€3.40
Steel pins for steps 10574, 10575, 10576, 10577 - Project 2000 ex 46586 Corresponds to point 6 of the attached drawing n°. 1 Ø 5 mm approx n°. 1 Ø 3 mm approx
185 ELECTRONIC MULTIFUNCTION CONTROL UNIT LIPPERT x 10750... 185 ELECTRONIC MULTIFUNCTION CONTROL UNIT LIPPERT x 10750... 2
RIC STEPS PROJECT2000

185 ELECTRONIC MULTIFUNCTION CONTROL UNIT LIPPERT x 10750 after 2013

PRO425844
€138.00
CONTROL UNIT 12542 - 185 MULTIFUNCTION ELECTRONICS LIPPERT STEP 10750 AFTER 2013 Multifunction electronic control unit to be applied to the Project 2000 electric steps to make the step completely autonomous.
Out-of-Stock
View
ELECTRICAL WIRING FOR 10570 ELECTRICAL WIRING FOR 10570 2
RIC STEPS PROJECT2000

ELECTRICAL WIRING FOR 10570

PRO446579
€15.90
CABLAGGIO ELETTRICO PER 10570
Galvanized hexagon 118x6V for step 10750-5500 Projet2000 Galvanized hexagon 118x6V for step 10750-5500 Projet2000 2
RIC STEPS PROJECT2000

Galvanized hexagon 118x6V for step 10750-5500 Projet2000

PRO424807
€5.90
Galvanized hexagon 118x6V for step 10750-5500 Projet2000 Internally threaded.
Right motor box step 10570 PROJECT 2000 Right motor box step 10570 PROJECT 2000 2
RIC STEPS PROJECT2000

Right motor box step 10570 PROJECT 2000

PRO446570
€34.00
Right step motor box 10570 - 10575 PROJECT 2000 Black painted sheet iron Dimensions 200 x 210 x h 105 mm approx Corresponds to point Q of 10570 Corresponds to point AG of 10575
SPACER AVP 15X12 ITEM 12541/14 SPACER AVP 15X12 ITEM 12541/14 2
RIC STEPS PROJECT2000

SPACER AVP 15X12 ITEM 12541/14

PRO424835
€2.50
SPACER AVP 15X12 ITEM 12541/14 Outer diameter approx 15mm Approximately 12mm high Inner diameter 7mm approx
PLASTIC COVER FOR STEP PLATFORM 10570 PLASTIC COVER FOR STEP PLATFORM 10570 2
RIC STEPS PROJECT2000

PLASTIC COVER FOR STEP PLATFORM 10570

PRO446574
€86.00
PLASTIC COVER FOR STEP PLATFORM 10570 The same for both the upper and lower platforms. Point 3 of the attached drawing.
Step tension spring 12473 from 440 Project 2000 Step tension spring 12473 from 440 Project 2000 2
RIC STEPS PROJECT2000

Step tension spring 12473 from 440 Project 2000

PRO424767
€11.50
Galvanized traction spring step 12473 from 440 Project 2000 Corresponds to point F of the attached drawing Spring outer diameter 20 mm Steel wire diameter 2.5 mm Total length 88 mm Total 18 turns1
Tension springs step 10576 PROJECT 2000 after matr. 158043 Tension springs step 10576 PROJECT 2000 after matr. 158043 2
RIC STEPS PROJECT2000

Tension springs step 10576 PROJECT 2000 after matr. 158043

PRO425635
€6.90
Step tension springs 10576 PROJECT 2000 after serial number 158043 Point 11 of the exploded view
Out-of-Stock
View
Product added to wishlist