CAMPKO gas cylinder 67R01 steel 22 L - 11 Kg GAS multivalve and pressure gauge
€279.00
VAT included
Rif: 16528
67R01 refillable 22 L steel gas cylinder with 80% multi valve and pressure gauge.
TheECE 67R01 approved cylinder can be safely filled at the fuel dispenser, thanks to the integrated multi-valve, equipped with an automatic stop at 80% filling.
BULKY TRANSPORT FOR THIS PRODUCT
- Water volume 22 lt - 11 Kg gas
- Direct refueling: automatic shutdown 80%
- European approval: ECE 67 R
- Empty cylinder weight approximately 14 kg
- Height including removable collar 485mm
- Diameter 300 mm
- Input: 3/4" unf
- Output: Male connection Germany W 21.8x1/14" LH
Only the cylinder is supplied, some optional accessories are also shown in the images.
See "attached documents" for instructions on how to use it.
Fixed installation in campers or caravans is REQUIRED AS PER REGULATIONS; use the optional fixing support.
The cylinder is supplied with a German gas loading connection and can be equipped with an Italy/Germany adapter for connection to the system of Italian vehicles.
Strengths of the cylinder:
- It is equipped with a pressure gauge for indicative reading of the gas content (for the gas level use MOPEKA or similar).
- The pre-assembled collar can be unscrewed to save space.
- It comes with a certificate of conformity and approval (sticker and welded plate).
- It is safe as it has a float valve that allows the pump to be blocked from filling when 80% of the contents are reached.
- It is valid for use for 10 years from the date of construction (month/year) and can subsequently be re-tested by the manufacturer .
- the cost of refueling at the distributor is about half that of traditional cylinders. It is recommended to use a gas filter.
- you can top up anywhere (Italy and Europe) without having to worry about deposits or finding a deposit.
See below, in the extended description, for further information
DISCOUNT - MAKE A PURCHASE OF AT LEAST €200
You will immediately get a €10 discount
ITALY - SHIPPING POLICIES
Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)
EUROPE - SHIPPING POLICIES
Shipping from €22.00 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.
UK - MINIMUM ORDER £135
Orders minimum £135, excluding shipping. Customs duties and taxes are the customer's responsibility.
The following system accessories can be purchased:
- Direct filling point on the cylinder. A filling nozzle, filling valve or remote filling can be mounted directly on the vehicle chassis or, with the help of a bracket, in the dedicated gas container locker.
- Filling line (0.5 to 3 m). LPG filling lines are used as supply lines between the filling neck / remote filling and the gas cylinder. The line is ECE 67 R 01 approved and is available in various lengths. The fittings are available in both straight and 90° angled forms.
- Gas filter. Indispensable because the percentage of oil contained in automotive gas is higher than that contained in LPG sold in cylinders: automotive fuel must in fact lubricate the moving parts of the engine.
- Cylinder holder. With this high-quality holder you can securely and correctly attach your new cylinder / tank to the wall.
- Remote gas level reading.
- Gas outlet adapter: from German male to Italian standard male SX W20 x 1/14" our code 4454.
For fixed installation see Ministerial regulation 19042 annex 1 of 3 August 2018.
WARNING: automotive LPG has a lower percentage of PROPANE (about 30/50%) than that contained in standard cylinders (about 90%) so it is necessary not to let the environment in which the cylinder is placed fall below zero degrees centigrade, otherwise the boiling of the gas could be prevented. This means that at zero degrees centigrade a part of the gas would remain unused in the cylinder and will become reusable only once this threshold is exceeded.
16528
2 Items
-
Frequently purchased together
- Out-of-Stock
16 other products in the same category:
- Out-of-Stock
- Pack
Gas regulator TRUMA MONOCONTROL CS 30mbar with crash sensor 8/10 after 2019 -...
€129.00
-€10.00
€119.00
Rif: 12561
- -€10.00
Vertical gas regulator DUOCONTROL CS 30mbar with crash sensor 8/10 after 2019...
€179.00
-€20.00
€159.00
Rif: 12560
- -€20.00
67R01 refillable 22 L steel gas cylinder with 80% multi valve and pressure gauge.
TheECE 67R01 approved cylinder can be safely filled at the fuel dispenser, thanks to the integrated multi-valve, equipped with an automatic stop at 80% filling.
BULKY TRANSPORT FOR THIS PRODUCT
- Water volume 22 lt - 11 Kg gas
- Direct refueling: automatic shutdown 80%
- European approval: ECE 67 R
- Empty cylinder weight approximately 14 kg
- Height including removable collar 485mm
- Diameter 300 mm
- Input: 3/4" unf
- Output: Male connection Germany W 21.8x1/14" LH
Only the cylinder is supplied, some optional accessories are also shown in the images.
See "attached documents" for instructions on how to use it.
Fixed installation in campers or caravans is REQUIRED AS PER REGULATIONS; use the optional fixing support.
The cylinder is supplied with a German gas loading connection and can be equipped with an Italy/Germany adapter for connection to the system of Italian vehicles.
Strengths of the cylinder:
- It is equipped with a pressure gauge for indicative reading of the gas content (for the gas level use MOPEKA or similar).
- The pre-assembled collar can be unscrewed to save space.
- It comes with a certificate of conformity and approval (sticker and welded plate).
- It is safe as it has a float valve that allows the pump to be blocked from filling when 80% of the contents are reached.
- It is valid for use for 10 years from the date of construction (month/year) and can subsequently be re-tested by the manufacturer .
- the cost of refueling at the distributor is about half that of traditional cylinders. It is recommended to use a gas filter.
- you can top up anywhere (Italy and Europe) without having to worry about deposits or finding a deposit.
See below, in the extended description, for further information
