CAMPKO gas cylinder 67R01 steel 30 L - 14 Kg multivalve and pressure gauge
€299.00
VAT included
Rif: 14910
Fillable 30 L 67R01 steel gas cylinder with 80% multi valve and pressure gauge.
TheECE 67R01 approved cylinder can be filled safely at the fuel dispenser, thanks to the integrated multi-valve, equipped with automatic stop when 80% full.
BULKY SHIPPING FOR THIS PRODUCT
- Water volume 30 lt - 14 kg gas
- Direct refueling: 80% automatic stop
- European approval: ECE 67 R
- Empty cylinder weight approximately 15 kg
- Height including removable collar 585mm
- Diameter 300mm
- Input: unf DA 3/4"
- Output: Germany W 21.8x1/14" LH male connection
Only the cylinder is supplied, some optional accessories are also shown in the images.
See the instructions for use in "attached documents".
Fixed installation in campers or caravans is REQUIRED AS PER REGULATION; Use the optional mounting bracket.
The cylinder is supplied with a German gas loading connection and can be equipped with an Italy/Germany adapter for connection to the system of Italian vehicles.
Strengths of the cylinder:
- it is equipped with a pressure gauge for indicative reading of the gas content (for the gas level use MOPEKA or similar).
- the pre-assembled collar can be unscrewed to save space.
- It is supplied with a certificate of conformity and approval (sticker and welded plate).
- it is safe as it has a valve with float that allows you to stop filling at the pump when it reaches 80% of the content.
- it is valid for use for 10 years from the date of construction (month/year) and can subsequently be retested by the manufacturer .
- the cost of refueling at the distributor is approximately half that of traditional cylinders. We recommend using gas filter.
- it can be recharged anywhere (Italy and Europe) without problems of deposit or search for a deposit.
See below, in the extended description, for further information
DISCOUNT - MAKE A PURCHASE OF AT LEAST €200
You will immediately get a €10 discount
ITALY - SHIPPING POLICIES
Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)
EUROPE - SHIPPING POLICIES
Shipping from €22.00 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.
UK - MINIMUM ORDER £135
Orders minimum £135, excluding shipping. Customs duties and taxes are the customer's responsibility.
System accessories can be purchased:
- Direct filling point on the cylinder. A filler neck, filling valve or remote refueling can be mounted directly on the vehicle chassis or, with the help of a support, in the locker dedicated to the gas container.
- Filling pipe (from 0.5 to 3 m). LPG filling hoses are used as supply lines between the remote filling/refueling neck and the gas cylinder. The line is ECE 67 R 01 approved and is available in various lengths. The fittings are available in both straight and 90° angled forms.
- Gas filter. Indispensable as the percentage of oil contained in automotive gas is higher than that contained in LPG sold in cylinders: automotive fuel must in fact lubricate the moving parts of the engine.
- Cylinder holder. With this high-quality holder you can attach your new cylinder / tank safely and correctly to the wall.
- Remote gas level reading.
- Gas outlet adapter: from Germany male to Italian standard male SX W20 x 1/14" our code 4454.
For fixed installation see Ministerial regulation 19042 annex 1 of 3 August 2018.
ATTENTION: automotive LPG has a percentage of PROPANE (approximately 30/50%) lower than that contained in standard cylinders (approximately 90%) so it is necessary not to let the environment in which the cylinder is placed fall below zero degrees centigrade , otherwise the gas boiling may be prevented. It means that at zero degrees centigrade a part of the gas would remain unused in the cylinder and will only become reusable once this threshold is exceeded.
14910
2 Items
-
Frequently purchased together
16 other products in the same category:
- Out-of-Stock
- New
Gas regulator HORIZONTAL DUOCONTROL CS 30mbar with crash sensor 8/10 after...
€179.00
-€20.00
€159.00
Rif: 12559
- -€20.00
Fillable 30 L 67R01 steel gas cylinder with 80% multi valve and pressure gauge.
TheECE 67R01 approved cylinder can be filled safely at the fuel dispenser, thanks to the integrated multi-valve, equipped with automatic stop when 80% full.
BULKY SHIPPING FOR THIS PRODUCT
- Water volume 30 lt - 14 kg gas
- Direct refueling: 80% automatic stop
- European approval: ECE 67 R
- Empty cylinder weight approximately 15 kg
- Height including removable collar 585mm
- Diameter 300mm
- Input: unf DA 3/4"
- Output: Germany W 21.8x1/14" LH male connection
Only the cylinder is supplied, some optional accessories are also shown in the images.
See the instructions for use in "attached documents".
Fixed installation in campers or caravans is REQUIRED AS PER REGULATION; Use the optional mounting bracket.
The cylinder is supplied with a German gas loading connection and can be equipped with an Italy/Germany adapter for connection to the system of Italian vehicles.
Strengths of the cylinder:
- it is equipped with a pressure gauge for indicative reading of the gas content (for the gas level use MOPEKA or similar).
- the pre-assembled collar can be unscrewed to save space.
- It is supplied with a certificate of conformity and approval (sticker and welded plate).
- it is safe as it has a valve with float that allows you to stop filling at the pump when it reaches 80% of the content.
- it is valid for use for 10 years from the date of construction (month/year) and can subsequently be retested by the manufacturer .
- the cost of refueling at the distributor is approximately half that of traditional cylinders. We recommend using gas filter.
- it can be recharged anywhere (Italy and Europe) without problems of deposit or search for a deposit.
See below, in the extended description, for further information
