Steel tape kit with 8 clamps - 300 cm
Steel tape kit with 8 clamps - 300 cm
Steel tape kit with 8 clamps - 300 cm
Steel tape kit with 8 clamps - 300 cm

Steel tape kit with 8 clamps - 300 cm

Rif: 15043
5 days of preparation excluding made to order items
€7.00
VAT included
7
5 days of preparation excluding made to order items

Steel tape kit with 8 clamps - 300 cm

Universal for pipes, filters, fittings

Cut the ribbon with a margin of at least 4 cm to insert the clamp.

 
70023
2 Items

16 other products in the same category:

Vent for drinking water tanks 22/24 mm Vent for drinking water tanks 22/24 mm 2
5 days of preparation excluding made to order items
Tank accessories

Vent for drinking water tanks 22/24 mm

300/059
€14.90
22/24 mm vent for potable water tanks, complete with threaded bush with nut and gasket. Drilling diameter approx. 33 mm. Total height of the compass about 90 mm. Hole approximately 22mm diameter. To be installed on the bottom of a gray or clear water tank, in order to be able to discharge.
COMET Seal closure DIN51 COMET Seal closure DIN51 2
5 days of preparation excluding made to order items
Tank accessories

COMET Seal closure DIN51

300/006-1
€1.50
COMET DIN51 Seal Closure Dimensions: 64x21 mm approx. Weight about 16 grams Color blue or white or other according to availability.
Expansion cap for water drainage holes from 13 to 17 mm
5 days of preparation excluding made to order items
Tank accessories

Expansion cap for water drainage holes from 13 to 17 mm

N2813017
€4.90
Tappo espansione scarico acqua fori da 13 a 17 mm
Expansion plug for holes Ø 24-25 mm
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 24-25 mm

60081
€8.90
Tappo ad espansione per fori Ø 24-25 mm
Expansion plug for holes Ø 26-27 mm
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 26-27 mm

60082
€7.90
Tappo ad espansione per fori Ø 26-27 mm
DIN 96 CAP WITH TWO HOLES DIN 96 CAP WITH TWO HOLES 2
5 days of preparation excluding made to order items
Tank accessories

DIN 96 CAP WITH TWO HOLES

018 TAPP-DIN96
€6.00
DIN 96 CAP WITH TWO HOLES Consisting of a threaded part and a perforated part for connections (hole to be enlarged as needed). Replacement for our article 14870, 14872 showers and tanks. Also to install an immersion pump in a tank and to be able to unscrew the cap to fill it without detaching the connections. Internal thread diameter 96 mm. Height...
THETFORD DOC-WASH CISTERN CLEANING KIT - the made in... THETFORD DOC-WASH CISTERN CLEANING KIT - the made in... 2
  • -€14.00
5 days of preparation excluding made to order items
Tank accessories

THETFORD DOC-WASH CISTERN CLEANING KIT - the made in Italy innovation for rinsing...

11870
€45.00 €59.00
THETFORD DOC-WASH CISTERN CLEANING KIT - the made in Italy innovation for rinsing motorhome toilet cisterns System for rinsing toilet cisterns for campers and caravans! Patented product 100% Made in Italy Motorhome travellers are familiar with that unpleasant moment when returning from every trip: emptying and cleaning the toilet cistern. An...
Expansion plug for holes Ø 33 mm for drinking water
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 33 mm for drinking water

BOC9002
€7.90
Expansion plug for holes Ø 33 mm for drinking water tanks
Additional tank cap Ø160x112x15mm Additional tank cap Ø160x112x15mm 2
5 days of preparation excluding made to order items
Tank accessories

Additional tank cap Ø160x112x15mm

RAC50311
€10.50
Additional inspection tank cap. Consisting of 3 pieces: cap, gasket and ring nut for fixing to the tank. Bayonet type closure. Fixing ring dimension Ø 160 x 112 x 15 mm.
Green tank outlet cap Ø 40 mm for gray water with gasket Green tank outlet cap Ø 40 mm for gray water with gasket 2
5 days of preparation excluding made to order items
Tank accessories

Green tank outlet cap Ø 40 mm for gray water with gasket

913010A0008193
€9.90
ACCESSORI PER SERBATOI - TAPPO DI ISPEZIONE Tappo  uscita serbatoio verde  Ø 40 mm acque grigie Con guarnizione.
Standard 4.5m strap tank fastening kit Standard 4.5m strap tank fastening kit 2
Out-of-Stock
Tank accessories

Standard 4.5m strap tank fastening kit

15130
€28.50
Standard 4.5m strap tank fastening kit This mounting kit is suitable for mounting a water tank up to a capacity of 200 litres Universal mounting kit for water or gas tanks, including under-vehicle mounting. This kit contains all the parts needed to mount a tank to your vehicle. The mounting strap is made of steel and housed in a plastic cover that...
View
Tappo per tanica Tappo per tanica 2
5 days of preparation excluding made to order items
Tank accessories

Tappo per tanica

300/084
€4.90
Plug-in cap for canister, with cable entry and pump hose Plug-in cap, not open, with cable passage and tube for the submersible pump. DIN96 Diameter 80 mm
DIN96 SCREW CAP FOR 13 LITER CANISTER DIN96 SCREW CAP FOR 13 LITER CANISTER 2
5 days of preparation excluding made to order items
Tank accessories

DIN96 SCREW CAP FOR 13 LITER CANISTER

018 TAPP-TAN19L
€4.50
Transfer funnel dia 160 mm Transfer funnel dia 160 mm 2
5 days of preparation excluding made to order items
Tank accessories

Transfer funnel dia 160 mm

67030
€6.10
Transfer funnel 160 mm diameter, with removable hose and steel filter.
Male cap Ø140mm for water tanks with rubber gasket Male cap Ø140mm for water tanks with rubber gasket 2
5 days of preparation excluding made to order items
Tank accessories

Male cap Ø140mm for water tanks with rubber gasket

60036
€9.90
Tappo maschio Ø140 mm per serbatoi acqua, con guarnizione in gomma.
DIN 96 closure with drain cock / lid DIN 96 closure with drain cock / lid 2
5 days of preparation excluding made to order items
Tank accessories

DIN 96 closure with drain cock / lid

300/010-1
€10.80
DIN 96 closure with drain cock / lid
Product added to wishlist