Gasket for male cap Ø140mm water tanks
Gasket for male cap Ø140mm water tanks
Gasket for male cap Ø140mm water tanks
Gasket for male cap Ø140mm water tanks

Gasket for male cap Ø140mm water tanks

Rif: 11066
5 days of preparation excluding made to order items
€4.50
VAT included
4.5
5 days of preparation excluding made to order items

Guarnizione per Tappo maschio Ø140mm serbatoi acqua

Dimensioni c.a. Ø 110/130 spessore 7 mm

In gomma 

 
60038M
5 Items

16 other products in the same category:

Steel tape kit with 8 clamps - 300 cm Steel tape kit with 8 clamps - 300 cm 2
5 days of preparation excluding made to order items
Tank accessories

Steel tape kit with 8 clamps - 300 cm

70023
€7.00
Steel tape kit with 8 clamps - 300 cm Universal for pipes, filters, fittings Cut the ribbon with a margin of at least 4 cm to insert the clamp.
Male cap Ø140mm for water tanks with rubber gasket Male cap Ø140mm for water tanks with rubber gasket 2
5 days of preparation excluding made to order items
Tank accessories

Male cap Ø140mm for water tanks with rubber gasket

60036
€9.90
Tappo maschio Ø140 mm per serbatoi acqua, con guarnizione in gomma.
Expansion cap for Ø 42 mm holes for drinking water
5 days of preparation excluding made to order items
Tank accessories

Expansion cap for Ø 42 mm holes for drinking water

BOC9003
€9.90
Expansion cap for Ø 42 mm drinking water tank holes
DIN 96 CAP WITH TWO HOLES DIN 96 CAP WITH TWO HOLES 2
5 days of preparation excluding made to order items
Tank accessories

DIN 96 CAP WITH TWO HOLES

018 TAPP-DIN96
€6.00
DIN 96 CAP WITH TWO HOLES Consisting of a threaded part and a perforated part for connections (hole to be enlarged as needed). Replacement for our article 14870, 14872 showers and tanks. Also to install an immersion pump in a tank and to be able to unscrew the cap to fill it without detaching the connections. Internal thread diameter 96 mm. Height...
Set di montaggio Berger Luxus per serbatoio Set di montaggio Berger Luxus per serbatoio 2
5 days of preparation excluding made to order items
Tank accessories

Set di montaggio Berger Luxus per serbatoio

300/075
€28.50
Set of accessories for fixing the water tank Suitable for installation under the floor or in the storage box of all water tanks. Load capacity per tension strap 150 kg! Solid and without deformation. Corrosion Proof: All parts are galvanized, the tension belt is additionally coated with plastic. No risk of expansion due to pressed sheet metal parts.Set SB...
COMET Seal closure DIN51 COMET Seal closure DIN51 2
5 days of preparation excluding made to order items
Tank accessories

COMET Seal closure DIN51

300/006-1
€1.50
COMET DIN51 Seal Closure Dimensions: 64x21 mm approx. Weight about 16 grams Color blue or white or other according to availability.
Joint for tank coupling 2
5 days of preparation excluding made to order items
Tank accessories

Joint for tank coupling 2

RAC50354
€9.64
2 '' junction fitting for tank coupling, complete with ring nut and two gaskets. Joint for tank.
Expansion plug for holes Ø 33 mm for drinking water
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 33 mm for drinking water

BOC9002
€7.90
Expansion plug for holes Ø 33 mm for drinking water tanks
Tappo per tanica Tappo per tanica 2
5 days of preparation excluding made to order items
Tank accessories

Tappo per tanica

300/084
€4.90
Plug-in cap for canister, with cable entry and pump hose Plug-in cap, not open, with cable passage and tube for the submersible pump. DIN96 Diameter 80 mm
DIN 96 closure with drain cock / lid DIN 96 closure with drain cock / lid 2
5 days of preparation excluding made to order items
Tank accessories

DIN 96 closure with drain cock / lid

300/010-1
€10.80
DIN 96 closure with drain cock / lid
Vent for drinking water tanks 22/24 mm Vent for drinking water tanks 22/24 mm 2
5 days of preparation excluding made to order items
Tank accessories

Vent for drinking water tanks 22/24 mm

300/059
€14.90
22/24 mm vent for potable water tanks, complete with threaded bush with nut and gasket. Drilling diameter approx. 33 mm. Total height of the compass about 90 mm. Hole approximately 22mm diameter. To be installed on the bottom of a gray or clear water tank, in order to be able to discharge.
Spare tank cap Ø126x34mm Spare tank cap Ø126x34mm 2
5 days of preparation excluding made to order items
Tank accessories

Spare tank cap Ø126x34mm

RAC50310
€6.90
Spare tank cap with gasket. Cannot be used for additional openings. Dimensions: Ø 136 mm. F: Ø 126 the threaded part x 34 mm.
Gasket for female cap Ø140 mm water tanks Gasket for female cap Ø140 mm water tanks 2
5 days of preparation excluding made to order items
Tank accessories

Gasket for female cap Ø140 mm water tanks

60038F
€3.50
Guarnizione per Tappo femmina Ø140mm serbatoi acqua Dimensioni c.a. Ø 120/140 spessore 7 mm In gomma espansa
COMET Replacement cap with gasket COMET Replacement cap with gasket 2
5 days of preparation excluding made to order items
Tank accessories

COMET Replacement cap with gasket

300/010-3
€3.10
COMET Replacement cap with gasket 3/4" Dimensions: 27X28X18 Weight about 10 grams Yellow color
Female cap Ø140mm water tanks with rubber gasket exp. Female cap Ø140mm water tanks with rubber gasket exp. 2
5 days of preparation excluding made to order items
Tank accessories

Female cap Ø140mm water tanks with rubber gasket exp.

60037
€9.90
Tappo femmina Ø140 mm perserbatoi acqua, con guarnizione in gomma espansa
Expansion plug for holes Ø 24-25 mm
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 24-25 mm

60081
€8.90
Tappo ad espansione per fori Ø 24-25 mm
Product added to wishlist