Motor Unit + Step Reducer 10571 Project 2000
Motor Unit + Step Reducer 10571 Project 2000
Motor Unit + Step Reducer 10571 Project 2000
Motor Unit + Step Reducer 10571 Project 2000
Motor Unit + Step Reducer 10571 Project 2000
Motor Unit + Step Reducer 10571 Project 2000
Motor Unit + Step Reducer 10571 Project 2000
Motor Unit + Step Reducer 10571 Project 2000
Motor Unit + Step Reducer 10571 Project 2000
Motor Unit + Step Reducer 10571 Project 2000

Motor Unit + Step Reducer 10571 Project 2000

Rif: 13532
5 days of preparation excluding made to order items
€184.00
VAT included
184
5 days of preparation excluding made to order items

Motor + Step Reducer Assembly 10571 Project 2000

Corresponds to item k in the attached drawing

Opposite hand to our item 17147

ON ORDER DELIVERY TIME 10 DAYS APPROX

  • TEM ON ORDER WITH DELIVERY TIME TO BE CONFIRMED BY THE MANUFACTURER.

  • The manufacturer's legal guarantee is valid.

  • See our G.C.S.

 
PRO425348
2 Items

You might also like

LIPPERT Complete step motor group 10750/5 LIPPERT Complete step motor group 10750/5 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

LIPPERT Complete step motor group 10750/5

PRO425204
€198.00
LIPPERT Complete step motor group 10750/5 Opposite hand to our article 13532

16 other products in the same category:

NC closing limit switch for PROJECT 2000 step 12473, 10750 NC closing limit switch for PROJECT 2000 step 12473, 10750 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

NC closing limit switch for PROJECT 2000 step 12473, 10750

PRO425794
€5.90
Interruttore fine corsa  chiusura NC per gradino PROJECT 2000 12473 - Punto 1 dell'eploso. 10750 - Punto 5 dell'esploso 1)Rate Current Voltage: 2.5A 250VAC;5A  125VAC 2)Contact Resistance: ≤50ΜΩ 3)Insulation Resistance: ≥100ΜΩ 4)Dielectric Intensity 1500 VAC/min 5)Working life: 50,000 cylces
LIPPERT CONTROL UNIT 080-30080-00 FOR NEW STEPS 10856... LIPPERT CONTROL UNIT 080-30080-00 FOR NEW STEPS 10856... 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

LIPPERT CONTROL UNIT 080-30080-00 FOR NEW STEPS 10856 VERSION V4

PRO426206
€85.00
LIPPERT CONTROL UNIT 080-30080-00 FOR NEW STEPS 10856 VERSION V4 Group consisting of: Control unit 080-30080-00 Wiring 080-00147 Adapter for 080-30080_AM
Lippert Step Front Mask 10856-550R V3 Lippert Step Front Mask 10856-550R V3 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Lippert Step Front Mask 10856-550R V3

PRO425970
€35.00
Lippert Step Front Mask 10856-550R V3 Total length 705mm Total height 110mm Black painted iron sheet
Non-slip platform kit for step 10750/4 Lippert Non-slip platform kit for step 10750/4 Lippert 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Non-slip platform kit for step 10750/4 Lippert

PRO424742
€54.50
Kit Pedana antiscivolo per gradino 10750/4 Lippert SU ORDINAZIONE TEMPO DI CONSEGNA 10/15 GIORNI
Gear for step motor 10750/10751 PROJECT 2000 Gear for step motor 10750/10751 PROJECT 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Gear for step motor 10750/10751 PROJECT 2000

PRO424727
€45.00
Plastic gear for motor 424719 (ex 424710) step 10750/10751 PROJECT 2000 Complete with mounting washers as standard. External diameter of teeth approx. 58 mm Shaft outer diameter approx. 10 mm Total height of the spare part approximately 63 mm Plastic gear with shaft and washer/shim kit to be assembled as per instructions. The image also shows...
ROD 10576-527 P230 L604 MM PROJECT2000 ROD 10576-527 P230 L604 MM PROJECT2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

ROD 10576-527 P230 L604 MM PROJECT2000

PRO425117
€96.00
REPLACEMENT ROD FOR MOBILE STEP 10576-527 - P230 L=604 MM PROJECT2000 Made to order, delivery time approximately 10 days. Ask for confirmation before purchasing.
12542 - 2020330815 CENTRALINA ELETTRONICA MULTIFUNZIONE 12542 - 2020330815 CENTRALINA ELETTRONICA MULTIFUNZIONE 2
Out-of-Stock
RIC STEPS PROJECT2000

12542 - 2020330815 CENTRALINA ELETTRONICA MULTIFUNZIONE

PRO424785-10231
€139.00
12542 - 308 MULTIFUNCTION ELECTRONIC CONTROL UNIT Multifunction electronic control unit to be applied to Project 2000 electric steps to make the step completely autonomous. Control unit with calibration 308 for Lippert / Project 2000 step models: 10750 (until 2013) 10751 10574P230 10574P280 10577 (up to serial number 000154406)....
View
TWO-WAY WHITE PF CONNECTOR TWO-WAY WHITE PF CONNECTOR 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

TWO-WAY WHITE PF CONNECTOR

PRO424860
€0.80
CONNETTORE PORTA FASTON BIANCO A DUE VIE
Motor assembly step 10574-5-6 PROJECT 2000 Motor assembly step 10574-5-6 PROJECT 2000 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Motor assembly step 10574-5-6 PROJECT 2000

PRO446605
€29.00
Innesto gruppo motore per  gradino 10574 - 10575 - 10576 PROJECT 2000 Punto 5 dell'esploso
LIPPERT Drive shaft 856-057-01 LIPPERT Drive shaft 856-057-01 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

LIPPERT Drive shaft 856-057-01

PRO426012
€4.90
LIPPERT Drive shaft 856-057-01 8 teeth External diameter approx. 18.5 mm Hole diameter approx. 8 mm Height approx. 35 mm
PROJECT 2000 step tension spring 12473, 10750, 10751, 10576 PROJECT 2000 step tension spring 12473, 10750, 10751, 10576 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

PROJECT 2000 step tension spring 12473, 10750, 10751, 10576

PRO425135
€6.00
Tension spring for PROJECT 2000 step mod. 12473, 10750, 10751, 10576 - 12473 - Point E of the exploded view. - 10750 - Point 9 of the exploded view - 10576 with 3 steps - Point 9 of the exploded view Distance between hooks approx. 60 mm Wire diameter approx. 1.7 mm External diameter approx. 15 mm
REDUCER 7: 1 PROJECT2000 MATR STEPS after 00154406 (EX... REDUCER 7: 1 PROJECT2000 MATR STEPS after 00154406 (EX... 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

REDUCER 7: 1 PROJECT2000 MATR STEPS after 00154406 (EX 425128) PROJECT 2000

PRO425622
€74.00
RIDUTTORE 7:1 PER GRADINI PROJECT 2000 MATR dopo 00154406 (EX 425128) Solo riduttore senza staffa Dimensioni corpo: 60x80 mm circa Spessore corpo: 35 mm circa Quadro: 13x13 mm circa Interasse dei 4 fori 42x42 mm circa - 2 fori 50 mm circa
SPACER AVP 15X12 ITEM 12541/14 SPACER AVP 15X12 ITEM 12541/14 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

SPACER AVP 15X12 ITEM 12541/14

PRO424835
€2.50
SPACER AVP 15X12 ITEM 12541/14 Outer diameter approx 15mm Approximately 12mm high Inner diameter 7mm approx
Rod group L 604 mm step PROJECT 2000 mod. 10575 Rod group L 604 mm step PROJECT 2000 mod. 10575 2
5 days of preparation excluding made to order items
RIC STEPS PROJECT2000

Rod group L 604 mm step PROJECT 2000 mod. 10575

PRO425073
€56.00
Rod assembly L 604 mm step PROJECT 2000 model 10575 It corresponds to point 7 of the exploded view attached step 10575
PROJECT 2000 step side panels and gasket group kit 10856,... PROJECT 2000 step side panels and gasket group kit 10856,... 2
5 days of preparation excluding made to order items
RIC 10856 PROJECT2000

PROJECT 2000 step side panels and gasket group kit 10856, 12473, 10750, 10575

PRO2023005874
€14.90
PROJECT 2000 step side panels and gasket group kit 10856, 12473, 10750, 10575 Composed of: right and left side panels in molded plastic material. Size approximately 228mm x 30mm approximately black rubber gasket, two 1 meter lengths - 12473- Point B of the exploded view - 10750 - Point 11 of the exploded view. - 10576 with 3 steps - Point 3 of the...
Left Engine Box step 10570, 10576, 10577 PROJECT 2000 Left Engine Box step 10570, 10576, 10577 PROJECT 2000 2
Out-of-Stock
RIC STEPS PROJECT2000

Left Engine Box step 10570, 10576, 10577 PROJECT 2000

PRO425219
€35.00
Left step motor box 10570, 10576, 10577 PROJECT 2000 Corresponds to point 5 of step 10576 Corresponds to point 4 of step 10577 The picture is of the right box but the left is supplied Black painted iron sheet Dimensions approximately 200 x 210 xh 105 mm
View
Product added to wishlist