

Rif: 15482
The BMTG detector is capable of sensing the presence of LPG (liquefied petroleum gas) and ether gas (narcotic effect) in the air; an acoustic signal warns of the presence of gas in the air before it has an effect on the people inside the passenger compartment and before its concentration reaches a tenth of the minimum value necessary to be able to trigger a possible explosion.
The two calibration levels present on the circuit allow the sensitivity of the sensor to be adjusted according to use and the chosen installation position.
Each detector is tested and calibrated with reference gas; the life span of the sensor is approximately 10 years.
Built-in version; complete with “BMAC2” frame The detector can be combined with the “MODULAR PLATES BERKER” series.
12V power supply.
Size 119 x 60mm.
Sensor consumption: 75mA
Acoustic power (buzzer): 85 dB at 1 metre
You will immediately get a €10 discount
Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)
Shipping from €22.00 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.
Orders minimum £135, excluding shipping. Customs duties and taxes are the customer's responsibility.
The BMTG detector is capable of sensing the presence of LPG (liquefied petroleum gas) and ether gas (narcotic effect) in the air; an acoustic signal warns of the presence of gas in the air before it has an effect on the people inside the passenger compartment and before its concentration reaches a tenth of the minimum value necessary to be able to trigger a possible explosion.
The two calibration levels present on the circuit allow the sensitivity of the sensor to be adjusted according to use and the chosen installation position.
Each detector is tested and calibrated with reference gas; the life span of the sensor is approximately 10 years.
Built-in version; complete with “BMAC2” frame The detector can be combined with the “MODULAR PLATES BERKER” series.
12V power supply.
Size 119 x 60mm.
Sensor consumption: 75mA
Acoustic power (buzzer): 85 dB at 1 metre