Toilet conversion kit KS1000 x CT4000 from cassette to nautical

The kit only consists of: Macerator/pump, cistern unloading connection, button, panel with relay and 12 V socket, assembly instructions.

By means of a fitting and a small diameter pipe (about 2 cm) the cistern is connected to the recovery tank which can be installed under the floor at any point in the camper.

The operation of the macerator-pump and the transfer of the sewage from the tank to the tank is controlled by a button installed inside the toilet compartment.

All the electrical and hydraulic parts are not tampered with.

The macerator is powered by the on-board battery via a polarized socket located inside the cassette compartment.

The tank full warning light will warn us when it is necessary to operate the macerator which will transfer about 10 kt of sewage in a few seconds into the recovery tank.

Characteristics:

• - Possibility of simultaneous use of cassette or nautical.
• - Connection box and recovery tank with ø 2 cm hose.
• - Possibility of installing the recovery tank in any position.
• - The whole system is mounted on the box.
• - The toilet is not tampered with.
• - Easy emptying of the recovery tank