- -€60.00

Rif: 16738
Nautic-Compact is a hot water boiler specially designed for motor and sailing yachts, campers, caravans and sales vehicles.
Nautic-Compact can also be used as a solar heat exchanger for connection to solar collectors.
The solar collector or solar thermal collector, also called solar thermal panel, differs from the photovoltaic solar panel precisely because of its function.
While the solar collector produces heat, the photovoltaic module produces electrical energy
With full heating (e.g. electric approx. 85 °C, motor approx. 90 °C) it is possible to extract two to three times the amount of hot water by adding cold water.
Nautic-Compact is pressure resistant and can be installed as standard or retrofitted to any cold water supply with flexible hoses.
The water connection is possible for a submersible pump, a foot or hand pump as well as for a pressure pump.
If you need to connect a water pipe with a pressure higher than 2.5 bar, you must use a pressure reducer.
The devices are intended for hose connections to counteract vibrations in the marine and mobile sectors.
Nautic-Compact is designed in such a way that, even when the domestic hot water tank is empty, the boiler always remains full and can never be emptied.
Complete emptying is therefore only possible when the water drain valve is open.
Nautic-Compact boilers and heat exchangers are made of the best acid-resistant V4A stainless steel material and are fully insulated.
Excellent insulation ensures that hot water is available the next day.
Installation can be done, for example, simply in a storage room, under a seating area or wherever adequate space is available.
Detailed assembly instructions are included with each device.
Technical details:
- Weight: 3.5 kg
- Dimensions L x H x D: 54 x 22 x 23 cm
- Working pressure: 0-3 bar
- Capacity: 10 Liters
- Voltage: 12V - 200W (about 16A)
- Heating time: about 27 min (55 ° C 1000W)
- Water temperature: adjustable from 30 ° C to 80 ° C
- Water tank: V4A stainless steel
- Insulation:EPP
- Overpressure protection: safety valve up to 3 bar
You will immediately get a €10 discount
Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)
Shipping from €22.00 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.
Orders minimum £135, excluding shipping. Customs duties and taxes are the customer's responsibility.
Nautic-Compact is a hot water boiler specially designed for motor and sailing yachts, campers, caravans and sales vehicles.
Nautic-Compact can also be used as a solar heat exchanger for connection to solar collectors.
The solar collector or solar thermal collector, also called solar thermal panel, differs from the photovoltaic solar panel precisely because of its function.
While the solar collector produces heat, the photovoltaic module produces electrical energy
With full heating (e.g. electric approx. 85 °C, motor approx. 90 °C) it is possible to extract two to three times the amount of hot water by adding cold water.
Nautic-Compact is pressure resistant and can be installed as standard or retrofitted to any cold water supply with flexible hoses.
The water connection is possible for a submersible pump, a foot or hand pump as well as for a pressure pump.
If you need to connect a water pipe with a pressure higher than 2.5 bar, you must use a pressure reducer.
The devices are intended for hose connections to counteract vibrations in the marine and mobile sectors.
Nautic-Compact is designed in such a way that, even when the domestic hot water tank is empty, the boiler always remains full and can never be emptied.
Complete emptying is therefore only possible when the water drain valve is open.
Nautic-Compact boilers and heat exchangers are made of the best acid-resistant V4A stainless steel material and are fully insulated.
Excellent insulation ensures that hot water is available the next day.
Installation can be done, for example, simply in a storage room, under a seating area or wherever adequate space is available.
Detailed assembly instructions are included with each device.
Technical details:
- Weight: 3.5 kg
- Dimensions L x H x D: 54 x 22 x 23 cm
- Working pressure: 0-3 bar
- Capacity: 10 Liters
- Voltage: 12V - 200W (about 16A)
- Heating time: about 27 min (55 ° C 1000W)
- Water temperature: adjustable from 30 ° C to 80 ° C
- Water tank: V4A stainless steel
- Insulation:EPP
- Overpressure protection: safety valve up to 3 bar