Best sellers

Antifreeze resistance 12Vdc - 55W - 110 lt. Antifreeze resistance 12Vdc - 55W - 110 lt. 2
5 days of preparation excluding made to order items
Antifreeze products

Antifreeze resistance 12Vdc - 55W - 110 lt.

SON110
€119.00
Self-adhesive antifreeze resistance - 12 Vdc - 55W - 110 lt.12 Vdc55W110 L 470 x 185 x 3 mmThermostat from 7°C to 19°CTo be applied to the bottom outside the tank using double-sided tape.Protects the tank up to a temperature of -40°C, ideal for both light and dark water tanks.Equipped with thermostat and switch.E1 certification.
SUPPORT FOR FIXING THE PROBE IN ANTI-FREEZE TANK SYSTEMS
5 days of preparation excluding made to order items
Antifreeze products

SUPPORT FOR FIXING THE PROBE IN ANTI-FREEZE TANK SYSTEMS

SON06
€2.20
SUPPORTO Per il fissaggio compatibile con SONDA CABLATA e SONDA CON TERMOSTATO SON05 E SON06
LILIE 24230 Thawing probe 12V - 30W with thermostat LILIE 24230 Thawing probe 12V - 30W with thermostat 2
5 days of preparation excluding made to order items
Antifreeze products

LILIE 24230 Thawing probe 12V - 30W with thermostat

300/070
€79.00
LILIE 24230 - 12V defrost probe with thermostat Heating elements for tanks with a capacity of max 40 L. capable of maintaining a temperature of about 5-10° C (values depending on the size of the same), preventing the water from freezing. Absorption: 30 W. Voltage: 12 V. Power on at 5°C, power off at 10°C. Dimensions: Ø 18 x 200 mm. Hole diameter 26...
Defrost probe 12V - 30W - with thermostat Defrost probe 12V - 30W - with thermostat 2
Out-of-Stock
Antifreeze products

Defrost probe 12V - 30W - with thermostat

SON02
€60.00
12V DEFROST PROBE WITH THERMOSTAT Engagement at 5°C and disengagement at 10°C. Dimensions: Ø 18 x 200 mm. Power consumption: 30W. Voltage: 12V It is recommended to install near the drain, in the lower part of the tank. Electric heaters for tanks with a capacity of max 40 L. capable of raising the temperature by 5-10°C (values that depend on the size of...
View
Silent Block 4 pcs. M / F shore 45 capacity 80 Kg
5 days of preparation excluding made to order items
Screws and accessories

Silent Block 4 pcs. M / F shore 45 capacity 80 Kg

SLB3001
€14.90
Silent Block M / F shore 45 capacity 80 Kg. Number 4 pieces Silent block M / F, high quality anti-vibration, NBR / SBR blend that allows a high hysteresis cycle. Ideal for installing fixed generators and cogenerators. Male connection M8x23 mm Female connection M8x2 mm External diameter of the rubber body 30 mm Height of the rubber body 30 mm
Technicoll 9403 clear cartridge 50 ml Technicoll 9403 clear cartridge 50 ml 2
5 days of preparation excluding made to order items
Bonding products

Technicoll 9403 clear cartridge 50 ml

SGL194CT
€39.90
Technicoll 9403 clear cartridge 50 ml High performance adhesive for structures Acrylic base Solvents Solvent-free Transparent color Application temp. From +15 ° C to + 25 ° C Workability time after 5 'approx Complete hardening after approx. 6 h See the technical data sheet in "download"
ABS cartridge Ø25mm 2 noses with lat output and O ring ABS cartridge Ø25mm 2 noses with lat output and O ring 2
5 days of preparation excluding made to order items
Cartridges 25 mm

ABS cartridge Ø25mm 2 noses with lat output and O ring

RUBCR25H
€19.00
Cartuccia in ABS 2 nasi Ø25mm c/uscita lat e O ring
ABS mixer REICH CERAMIK crom. satin hole Ø 27 ABS mixer REICH CERAMIK crom. satin hole Ø 27 2
5 days of preparation excluding made to order items
Mixers with microint

ABS mixer REICH CERAMIK crom. satin hole Ø 27

61014.80
€89.00
Reich DE LUXE mixer in matt satin chrome hole Ø 27 Single-lever mixer with ceramic ring. Tilting pouring spout that allows the assembly of a 1/2 "threaded hand shower. Thread Ø 27 mm, length 28 mm. Type A connections Collapsible barrel
ABS mixer REICH KAMA hole Ø36 hand shower extr ABS mixer REICH KAMA hole Ø36 hand shower extr 2
5 days of preparation excluding made to order items
No microint mixers

ABS mixer REICH KAMA hole Ø36 hand shower extr

61166
€174.00
Reich Kama chromed mixer s / switch hole Ø36 pull-out hand shower In ABS, type A connections, hose connection diameter 10/12 mm Resistant to a maximum pressure of 6 bar Hole diameter 36 mm Barrel distance 185 mm Max height 140 mm Double jet hand shower
ELKA LUKE brass tap single folding spout ELKA LUKE brass tap single folding spout 2
5 days of preparation excluding made to order items
Taps no microint

ELKA LUKE brass tap single folding spout

RUB3115
€79.00
Single spout collapsible tap Tap with threaded connections type B Ø 17 mm. Width 98m. Max height 220mm. Barrel distance 180 mm.
Brass mixer group ELKA LUKE chrome c.abatt. Brass mixer group ELKA LUKE chrome c.abatt. 2
Out-of-Stock
No microint mixers

Brass mixer group ELKA LUKE chrome c.abatt.

N0103110
€59.00
ELKA LUKE brass mixer with folding spout, chromed. Wheelbase 84 mm. Threaded connections type B Ø17 mm. Width 157 mm. Height mx 210 mm. Barrel distance 180 mm. COMING SOON, available in 24 days
View
Chromed brass mixer group with blast chiller barrel
5 days of preparation excluding made to order items
No microint mixers

Chromed brass mixer group with blast chiller barrel

018 2034.30
€46.00
Chromed brass mixer group with folding spout, without hoses Chromed brass mixer. Center distance 95 mm. approximately Min height 60 mm with barrel down Max height 160 mm with high barrel Barrel distance 60 mm. approximately
Ott / ABS mixer ELKA BARBY monoc. c / pull-out shower Ott / ABS mixer ELKA BARBY monoc. c / pull-out shower 2
5 days of preparation excluding made to order items
No microint mixers

Ott / ABS mixer ELKA BARBY monoc. c / pull-out shower

RUB2020
€115.00
Brass / ABS mixer ELKA BARBY single lever with ABS pull-out shower and swivel spout Without microswitch ELKA BARBY Type C connections Max height 130mm Barrel distance 15o mm Hose length 150 cm
Metallic T-fitting Ø 20x20x16 mm
5 days of preparation excluding made to order items
Access heat exchangers

Metallic T-fitting Ø 20x20x16 mm

RIS276
€7.80
Per installazione scambiatori di calore THERMOBILE Raccordo a T in alluminio zincato Resistente alle alte temperature Dimensioni: diametro 20x20x16 mm Compatibile con l'impianto del DUCATo X250
Reduction MM 1''1 / 4 - 1''1 / 2
5 days of preparation excluding made to order items
Plastic threaded fittings

Reduction MM 1''1 / 4 - 1''1 / 2

RID02
€2.80
Riduzione M-M 1'1/4 - 1'1/2
Reduction MM 1/2 '' - 3/4 ''
5 days of preparation excluding made to order items
Plastic threaded fittings

Reduction MM 1/2 '' - 3/4 ''

RID01
€1.80
Riduzione M-M 1/2'-3/4'
Kit 2 pcs. 3-position flap for benches Kit 2 pcs. 3-position flap for benches 2
Out-of-Stock
Articulated hinges

Kit 2 pcs. 3-position flap for benches

RIB3P
€99.00
FLAP WITH THREE POSITIONSThanks to this flap it will be possible to move the seat into the street, dinette or night positions with extreme ease and in complete safety. Weight 3.3 Kg Bichromate galvanized steel Delivery time 7 days
View
Straight connection Ø 12 mm w / tap w / rod
5 days of preparation excluding made to order items
Plastic quick couplings

Straight connection Ø 12 mm w / tap w / rod

RAC913
€14.90
Racc. dritto Ø 12 mm c/rubinetto c/asta
Complete straight male fitting Ø 20 mm 3/4'' Complete straight male fitting Ø 20 mm 3/4'' 2
5 days of preparation excluding made to order items
Plastic threaded fittings

Complete straight male fitting Ø 20 mm 3/4''

RAC50313
€3.00
Complete straight male fitting Ø 20 mm 3/4'' D = 20 mm F = 3/4" H = 22 mm L = 49 mm
Spare tank cap Ø126x34mm Spare tank cap Ø126x34mm 2
5 days of preparation excluding made to order items
Tank accessories

Spare tank cap Ø126x34mm

RAC50310
€6.90
Spare tank cap with gasket. Cannot be used for additional openings. Dimensions: Ø 136 mm. F: Ø 126 the threaded part x 34 mm.
Rac.compl. 45 ° Ø 35 mm 1''1 / 4
Out-of-Stock
Plastic threaded fittings

Rac.compl. 45 ° Ø 35 mm 1''1 / 4

RAC50307
€5.40
Rac.compl.45° Ø 35 mm 1'1/4
View
Complete straight fitting Ø 35 mm 1''1/4 Complete straight fitting Ø 35 mm 1''1/4 2
5 days of preparation excluding made to order items
Plastic threaded fittings

Complete straight fitting Ø 35 mm 1''1/4

RAC50305
€4.50
Complete straight fitting Ø 35 mm 1''1/4 D = 35 mm F = 0 1*/4" H = 24 mm L = 61 mm
Complete curved connection Ø 25 mm 3/4'' Complete curved connection Ø 25 mm 3/4'' 2
5 days of preparation excluding made to order items
Plastic threaded fittings

Complete curved connection Ø 25 mm 3/4''

RAC50304
€3.50
Complete curved connection Ø 25 mm 3/4'' D = 25 mm F = 3/4" H = 22 mm L = 53 mm
Roof bars Fixing-Bar Rail FIAMMA Roof bars Fixing-Bar Rail FIAMMA 2
5 days of preparation excluding made to order items
FIAMMA roof rack

Roof bars Fixing-Bar Rail FIAMMA

931760
€189.00
FIAMMA ROOF BARS - FIXING BAR RAIL Pair of roof bars in anodized aluminum. Easily combined with the Roof Rail without drilling the vehicle. They are easily shortened. Complete with 2 bars, 4 die-cast aluminum fixing terminals and 4 rubber spacers. Length: 245 cm

Accessories

Product added to wishlist