LIPPERT 425249 STANDARD SLIDING GUIDE CM.99 BED DEVICES
LIPPERT 425249 STANDARD SLIDING GUIDE CM.99 BED DEVICES
LIPPERT 425249 STANDARD SLIDING GUIDE CM.99 BED DEVICES
LIPPERT 425249 STANDARD SLIDING GUIDE CM.99 BED...
LIPPERT 425249 STANDARD SLIDING GUIDE CM.99 BED...
LIPPERT 425249 STANDARD SLIDING GUIDE CM.99 BED...

LIPPERT 425249 STANDARD SLIDING GUIDE CM.99 BED DEVICES

Rif: 14041
5 days of preparation excluding made to order items
€24.90
VAT included
24.9
5 days of preparation excluding made to order items

425249 LIPPERT - STANDARD SLIDE GUIDE CM.99 BED DEVICES - 2020334767

Silver anodized aluminum alloy profile.

Maximum width 85 mm

Height approx. 17 mm

Compatible with all Lippert beds

  DISCOUNT - MAKE A PURCHASE OF AT LEAST €200

You will immediately get a €10 discount

  ITALY - SHIPPING POLICIES

Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)

  UK - MIN ORDER £135 EXCL. SHIPPING

Customs duties and taxes are the customer's responsibility.

  EUROPE - SHIPPING POLICIES

Shipping from €14,90 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.

 

You might also like

LIPPERT 425608 - TERMINAL FOR STANDARD SLIDING GUIDE BED... LIPPERT 425608 - TERMINAL FOR STANDARD SLIDING GUIDE BED... 2
BED SPARE PARTS

LIPPERT 425608 - TERMINAL FOR STANDARD SLIDING GUIDE BED DEVICES

25264
€2.90
LIPPERT 425608 - TERMINAL FOR SLIDING GUIDE STANDARD BED DEVICES - 2020339437

16 other products in the same category:

STABILIZER SPARE BRACKET FOR BEDS 425177 STABILIZER SPARE BRACKET FOR BEDS 425177 2
  • -€4.00
BED SPARE PARTS

STABILIZER SPARE BRACKET FOR BEDS 425177

25062
€20.90 €24.90
STABILIZER SPARE BRACKET FOR BEDS 425177 1 - Block for belt guide carriage stabilizing bracket2 - Plate for stabilizer bracket with fins3 - Stabilizing bracket for belt guide carriage4 - Sliding plastic5 - Galvanized washer Øi 5,2 Øe 15 UNI 69526 - Galvanized elastic washer Øi 4.1 Øe 9.2 UNI 17517 - Low self-locking nut M4 UNI 7474 coarse pitch galvanized
LIPPERT 425247 SAFETY STRAP BED DEVICE WITH HARNESS LIPPERT 425247 SAFETY STRAP BED DEVICE WITH HARNESS 2
BED SPARE PARTS

LIPPERT 425247 SAFETY STRAP BED DEVICE WITH HARNESS

25252
€75.00
LIPPERT 425247 SAFETY STRAP BED DEVICE COMPLETE WITH HARNESS - 2020334746 For use of the product with a belt. Allows safety when the bed is raised.
BED CONTROL PANEL WITH ELECTRONIC CONTROL UNIT WITH KEY BED CONTROL PANEL WITH ELECTRONIC CONTROL UNIT WITH KEY 2
BED SPARE PARTS

BED CONTROL PANEL WITH ELECTRONIC CONTROL UNIT WITH KEY

25261
€189.00
BED CONTROL PANEL WITH ELECTRONIC CONTROL UNIT WITH KEY For beds with electronic control unit. Up to 5 positions can be programmed. Delivery time about 10/15 days ON ORDER
Out-of-Stock
View
Fall protection net for 60x200 berths
Bed fall protection nets

Fall protection net for 60x200 berths

911623
€16.50
Fall protection net for bunks 60x200 cm Soft net to be fixed on the side of the bed. For the protection of high beds, bunk beds or attic beds in the camper. With 4 plastic hooks for attachment to the four corners, to be screwed, in nylon and perimeter elastic Rhomboidal format network
Gearmotor with ENCODER and PTC spare part for 12600... Gearmotor with ENCODER and PTC spare part for 12600... 2
  • New
BED SPARE PARTS

Gearmotor with ENCODER and PTC spare part for 12600 tilting bed Project 2000 -...

2024112181
€589.00
Gearmotor with ENCODER and PTC spare part for 12600 tilting bed Project 2000 - 2024026361 - 080-40013-A-003 LAIKA SPARE PART FOR BED ARTICLE 12600 INSTALLED ON LAIKA Corresponds to the sign 1 of the attached exploded view 12 VDC 9.7 A 12 Nm 33 rpm Shaft diameter approx. 14 mm. Output shaft projection approx. 50 mm. Key size approx. 5x35 mm
Sliding plastic bed Project 2000 - 425175 Sliding plastic bed Project 2000 - 425175 2
BED SPARE PARTS

Sliding plastic bed Project 2000 - 425175

PRO425175
€14.90
Sliding plastic bed Project 2000 - 425175 Approximate dimensions 68x45x32 mm Corresponds to 425175 in the attached drawing
Gas spring for camper bed 1000N cylinder 22 mm Open... Gas spring for camper bed 1000N cylinder 22 mm Open... 2
Gas pistons and access.

Gas spring for camper bed 1000N cylinder 22 mm Open Closed 485-258

1000-485-258
€69.00
Gas spring for camper bed 1000N cylinder 22 mm - Open - Closed: 485-258 Fixing hole diameter 8.3 mm Distance between fixing holes 485 mm Rod diameter 10 mm
LIPPERT ELEKTRA 2 - BED LIFT MODULE WITH 2022013464 KEY LIPPERT ELEKTRA 2 - BED LIFT MODULE WITH 2022013464 KEY 2
BED SPARE PARTS

LIPPERT ELEKTRA 2 - BED LIFT MODULE WITH 2022013464 KEY

LCI2022013464
€89.00
LIPPERT ELEKTRA 2 - BED LIFT MODULE WITH 2022013464 KEY Control unit with control panel to manage the lifting movement of the bed Switch with control panel Can be installed separately from the bed frame Keyed Metallic grey colour
Out-of-Stock
View
LIPPERT 425725 - SLIDING GUIDE AC CM.160 BED DEVICES 12600 LIPPERT 425725 - SLIDING GUIDE AC CM.160 BED DEVICES 12600 2
BED SPARE PARTS

LIPPERT 425725 - SLIDING GUIDE AC CM.160 BED DEVICES 12600

25254
€29.00
LIPPERT 425725 - SLIDING GUIDE AC CM.160 BED DEVICES 12600 - 2021104251 They are more adaptable guides because they are able to work both in compression and decompression; furthermore, they allow, with special arms, to overcome any furniture obstacles without modifying the layout of the vehicle. Compatible with all Lippert beds Item with BULKY transport
TRIGANO BED CONTROL UNIT LIPPERT 12600 NO STANDARD... TRIGANO BED CONTROL UNIT LIPPERT 12600 NO STANDARD... 2
  • New
BED SPARE PARTS

TRIGANO BED CONTROL UNIT LIPPERT 12600 NO STANDARD (080-30040-04)

2020340653
€159.00
TRIGANO BED CONTROL UNIT LIPPERT 12600 NO STANDARD (080-30040-04)
Out-of-Stock
View
SMART ACCESSORIES BED DEVICE SMART ACCESSORIES BED DEVICE 2
BED SPARE PARTS

SMART ACCESSORIES BED DEVICE

25291
€119.00
SMART ACCESSORIES BED DEVICE Brackets kit designed for fixing the bed base to the lifting system. The combination of Smart Electric Bed with Smart Frame and Smart Accessories offers a complete solution to obtain a finished bed, completely customized and with the comfort of a wooden slatted base. Delivery time around 10/15 days ON ORDER
Product added to wishlist