

Rif: 16602
The Al310DF Mod. POWER SUPPLY-BATTERY CHARGER incorporates a switching type AC/DC converter and a management board with intelligent control which, in addition to sectioning and protecting the output lines, measures currents, voltages, ampere/hours, temperature, etc. and shares all this with the other elements that make up the AS-D2NA (R-CAN) system on the communication bus.
The characteristics of the switching module are: input 88~132VAC/176 ~ 264VAC, frequency 47~63Hz, adjustable output 12~15V, power 120W.
The module provides for the connections of two batteries with the possibility of recharging them in parallel both with the engine on and with the engine off through the external 230VAC network; output for 30A cell power supply and 20A fridge. Battery switch with built-in light signal for diagnostics and non-destructive active protections of the service and fridge outputs.
Shunt type regulator for solar panels up to 100W.
Overall weight of approximately 1.5 kg.
The power supply, if connected to the external network, supplies power even without connecting the batteries.
You will immediately get a €10 discount
Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)
Shipping from €22.00 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.
Orders minimum £135, excluding shipping. Customs duties and taxes are the customer's responsibility.
You might also like
Rif: 15874
The Al310DF Mod. POWER SUPPLY-BATTERY CHARGER incorporates a switching type AC/DC converter and a management board with intelligent control which, in addition to sectioning and protecting the output lines, measures currents, voltages, ampere/hours, temperature, etc. and shares all this with the other elements that make up the AS-D2NA (R-CAN) system on the communication bus.
The characteristics of the switching module are: input 88~132VAC/176 ~ 264VAC, frequency 47~63Hz, adjustable output 12~15V, power 120W.
The module provides for the connections of two batteries with the possibility of recharging them in parallel both with the engine on and with the engine off through the external 230VAC network; output for 30A cell power supply and 20A fridge. Battery switch with built-in light signal for diagnostics and non-destructive active protections of the service and fridge outputs.
Shunt type regulator for solar panels up to 100W.
Overall weight of approximately 1.5 kg.
The power supply, if connected to the external network, supplies power even without connecting the batteries.