VENT FITTING FOR IMMERSION PUMPS
VENT FITTING FOR IMMERSION PUMPS

VENT FITTING FOR IMMERSION PUMPS

Rif: 14526
5 days of preparation excluding made to order items
€1.90
VAT included
1.9
5 days of preparation excluding made to order items

RACCORDO DI SFIATO POMPE IMMERSIONE

Ø 10-12,7 MM

 
018C1060501
10 Items

16 other products in the same category:

Automatic switch for immersion pump connection for taps
5 days of preparation excluding made to order items
Access pumps immers - line

Automatic switch for immersion pump connection for taps

18301505
€18.00
Automatic switch immersion pump with connection for taps IN = Hose connection for pipe internal Ø 12 mm OUT = 3/8 "female connection NC microswitch contact
COMET Submersible pump 12VDC - 20 lt per minute - JG... COMET Submersible pump 12VDC - 20 lt per minute - JG... 2
5 days of preparation excluding made to order items
Immersion pumps

COMET Submersible pump 12VDC - 20 lt per minute - JG quick coupling

018 1440 12JG
€26.90
COMET Submersible pump 12VDC - 20 lt per minute - JG quick coupling Height 12.5 cm Length 4.5 cm Width 4.1 cm Consumption 3.75 A Input voltage 12 VDC Max water pressure 1.1 bar Minute flow rate 20 l
COMET foot switch for immersion pumps COMET foot switch for immersion pumps 2
5 days of preparation excluding made to order items
Access pumps immers - line

COMET foot switch for immersion pumps

018 3030.03
€5.00
FOOTSWITCH COMET BEIGE FOR SUBMERSIBLE PUMPS
COMET - Attacco pompa ad immersione
5 days of preparation excluding made to order items
Filter Sanitize Purify

COMET - Attacco pompa ad immersione

300/116-3
€4.90
COMET - Filter for submersible pump
R R 2
5 days of preparation excluding made to order items
Access pumps immers - line

R

62065
€14.90
REICH Non-return valve for double motor submersible pumps such as TANDEM and TWIN This adapter has been designed for conversion from a quick-mount 12 mm hose (Uni-Quick) to a 10 mm hose hose (up to 14 mm).
FILTER X IN LINE PUMPS JG 12 mm
5 days of preparation excluding made to order items
Access pumps immers - line

FILTER X IN LINE PUMPS JG 12 mm

1830060112
€6.90
FILTER X IN LINE PUMPS JG 12 mm Brand JG Entry John Guest 12 mm Outlet for insertion into the pump shank Dimensions approximately 58 mm, diameter approximately 27 mm
Filter for immersion pumps
5 days of preparation excluding made to order items
Access pumps immers - line

Filter for immersion pumps

0183006.01
€5.00
Filtro per pompe a immersione
Non-return valve for in-line pumps with JG connections Non-return valve for in-line pumps with JG connections 2
5 days of preparation excluding made to order items
Access pumps immers - line

Non-return valve for in-line pumps with JG connections

018 3008.02.12
€10.90
Non-return valve for in-line pumps - JG connections for 12 mm diameter hose JG brand John Guest 12 mm entry and exit Size 65mm approx, diameter 27mm approx
Non-return valve for submersible pumps JG 12 mm
5 days of preparation excluding made to order items
Access pumps immers - line

Non-return valve for submersible pumps JG 12 mm

1830045312
€7.50
NON-RETURN VALVE FOR IMMERSION PUMPS JG 12 mm Brand JG Entry John Guest 12 mm Outlet for insertion into the shank of the immersion pump Dimensions approximately 58 mm, diameter approximately 27 mm
Non-return valve for immersion pumps
5 days of preparation excluding made to order items
Access pumps immers - line

Non-return valve for immersion pumps

018 3004.53
€4.90
Valvola non ritorno pompe a immersione
BARWIG diaphragm switch Ø 10 mm for press / immersion pumps BARWIG diaphragm switch Ø 10 mm for press / immersion pumps 2
5 days of preparation excluding made to order items
Access pumps immers - line

BARWIG diaphragm switch Ø 10 mm for press / immersion pumps

61192
€18.50
BARWIG diaphragm switch Ø 10 mm for pressure and immersion pumps Required for the operation of submersible pumps as a water pressure detection system. Installation in a pressure hose after the pump. Switching power: max 15A Switching pressure 0.4 bar and 0.65 bar For tube Ø 10 mm Dimensions 40x100x165 mm
BARWIG water filter Ø 10 mm for submersible pumps BARWIG water filter Ø 10 mm for submersible pumps 2
5 days of preparation excluding made to order items
Access pumps immers - line

BARWIG water filter Ø 10 mm for submersible pumps

61195
€4.90
Barwig water filter diameter 10 mm for 12V immersion pumps
COMET - Pressure switch 0.8 bar for VIP pump - John Guest COMET - Pressure switch 0.8 bar for VIP pump - John Guest 2
5 days of preparation excluding made to order items
Access pumps immers - line

COMET - Pressure switch 0.8 bar for VIP pump - John Guest

018 3002.02JG
€29.90
COMET - Pressure switch 0.8 bar for VIP pump - John Guest Mounting inside flexible pipe systems Connection: PE pipe external diam. 12 mm Closing pressure: 0.8 bar JG 12mm Female Inline Pressure Switch
Battery box for immersion pumps Battery box for immersion pumps 2
5 days of preparation excluding made to order items
Access pumps immers - line

Battery box for immersion pumps

0183031.06
€13.50
Battery box for immersion pumps
BARWIG check valve Ø 10 mm for submersible pumps BARWIG check valve Ø 10 mm for submersible pumps 2
5 days of preparation excluding made to order items
Access pumps immers - line

BARWIG check valve Ø 10 mm for submersible pumps

61194
€5.90
BARWIG Water Check Valve Ø 10 mm for 12V Submersible Pumps
Pressure switch 0.8 bar for immersed pumps pump connection Pressure switch 0.8 bar for immersed pumps pump connection 2
5 days of preparation excluding made to order items
Access pumps immers - line

Pressure switch 0.8 bar for immersed pumps pump connection

018 3002.02
€19.90
Pressostato (Interruttore automatico a membrana) per pompe a immersione, montaggio sul tubo di mandata della pompa Pressione 0.8 bar IN = Attacco portagomma per tubo Ø interno 12 mm OUT = per tubo mandata della pompa ad immersione
Product added to wishlist