Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel
Lilie LP1805 expansion vessel

Lilie LP1805 expansion vessel

Rif: 16070
Out-of-Stock
€69.00
VAT included
69

Lilie expansion vessel

A constant pressure air container with a flexible membrane. The lung pressure is preset to 1.4 bar and can be changed with a bicycle pump. Optimal operation if this value is close to the pump restart pressure.

Consistently quiet, with no splashing or pulsating

Extended life of the pressurized water diaphragm pump

Does not require power

Save battery power

Reduced on and off time

It can be mounted in any position

Cushioned fixing on rubber feet

Connections: 1/2 inch

Dimensions H200x113x120 mm

Flow rate 8.6 bar

Volume 0.75 litres

Thermoplastic PA material

DIN 2001-2 W270 KTW


 
PMP203

16 other products in the same category:

Shurflo expansion vessel Shurflo expansion vessel 2
5 days of preparation excluding made to order items
Access pumps autom

Shurflo expansion vessel

61003
€89.00
Vaso di espansione Shurflo Completo di due raccordi dritti da 1/2", caricato alla pressione di 1.4BAR. Può essere montato in qualunque posizione. Portata 8,6 bar.  Dimensioni 226x113x120 mm. Raccordi Entrata/Uscita 1/2 "
COMET expansion vessel JG12 quick connections COMET expansion vessel JG12 quick connections 2
5 days of preparation excluding made to order items
Access pumps autom

COMET expansion vessel JG12 quick connections

018 3038.04
€22.90
COMET expansion vessel tube 10/12 JG12 quick connections Maximum pressure 3 bar at 20°. For tube diameter 10/12 mm Ideal for use with pumps without a non-return valve. Supplied with screws and absorbent band with double-sided tape. Diameter: 82mm Height: 280mm For continuous water flow in pressurized systems, installed between the pump and the...
Spare Expansion Tank Membrane Kit A20 FLAME Spare Expansion Tank Membrane Kit A20 FLAME 2
5 days of preparation excluding made to order items
Access pumps autom

Spare Expansion Tank Membrane Kit A20 FLAME

FIA98657008
€12.90
Kit membrana in gomma A20 FIAMMA ricambio
Fitting for pump 1 / 2-14NPT (F) x 1/2 burr curved "
5 days of preparation excluding made to order items
Access pumps autom

Fitting for pump 1 / 2-14NPT (F) x 1/2 burr curved "

61147
€2.90
Fitting for pump 1/2 "-14NPT (F) x 1/2 burr curved Elbow fitting in nylon for 1/2 "(Ø 12.5 / 13.5) flexible hoses Connection suitable for FIAMMA and SHURFLO pumps
Filter for Shurflo pumps F 1/2- M 1/2 - 255-213 Filter for Shurflo pumps F 1/2- M 1/2 - 255-213 2
5 days of preparation excluding made to order items
Access pumps autom

Filter for Shurflo pumps F 1/2- M 1/2 - 255-213

15935910
€8.40
Replacement filter for Shurflo pumps F 1/2- M 1/2 - 255-213 M 1/2 (15 x 21) - F 1/2 (15 x 21). Easily washable by unscrewing the transparent cover and extracting the stainless steel filter
Fitting for pump 1 / 2-14NPT (F) x 1/2 straight burr "
5 days of preparation excluding made to order items
Access pumps autom

Fitting for pump 1 / 2-14NPT (F) x 1/2 straight burr "

61145
€2.20
Raccordo x pompa 1/2"-14NPT(F) x 1/2 bava diritto Raccordo dritto in nylon per tubi flessibili 1/2"
LILIE 1/2 inch Male Screw Filter BAVA Female LILIE 1/2 inch Male Screw Filter BAVA Female 2
5 days of preparation excluding made to order items
Access pumps autom

LILIE 1/2 inch Male Screw Filter BAVA Female

300/295
€10.50
LILIE 1/2 inch Male Screw Filter Female BAVA Screws directly onto pumps. A fine-mesh stainless metal filter prevents damage to the pump and water system. Transparent screw-on filter housing allows easy cleaning and is suitable for drinking water. Wing nut facilitates installation so that the filter remains movable after installation
1/2 '' male pump fitting with 90 ° "bend
5 days of preparation excluding made to order items
Access pumps autom

1/2 '' male pump fitting with 90 ° "bend

018 RAC-M12
€2.50
Raccordo per pompa maschio 1/2" con curva a 90° CONVERTE L'ATTACCO CLASSICO PER POMPA DA 1/2" FEMMINA A 1/2" MASCHIO
Expansion vessel A20 FIAMMA - 0247801-2 Expansion vessel A20 FIAMMA - 0247801-2 2
5 days of preparation excluding made to order items
Access pumps autom

Expansion vessel A20 FIAMMA - 0247801-2

61260
€39.90
A20 FIAMMA expansion vessel - 0247801 blue version and 0247802 black version subject to availability. The universal A20 expansion vessel from FIAMMA. See the manual in "attached documents". Dimensions: 100x98x234.4 mm Ideal complement to the Aqua 8 and Aqua F and any other type of pump, such as Shurflo and Flojet. The A20 expansion vessel eliminates...
Fitting for pump 1 / 2-14NPT (F) x 3/8 straight burr "
5 days of preparation excluding made to order items
Access pumps autom

Fitting for pump 1 / 2-14NPT (F) x 3/8 straight burr "

61146
€2.90
Fitting for pump 1/2 "-14NPT (F) x 3/8 straight burr Straight nylon fitting for 3/8 "hoses
COMET expansion vessel tube 10/12 COMET expansion vessel tube 10/12 2
5 days of preparation excluding made to order items
Access pumps autom

COMET expansion vessel tube 10/12

910667
€19.90
COMET expansion vessel tube 10/12 Maximum pressure 3 bar at 20 °. For tube diameter 10/12 mm Ideal for use with pumps without non-return valve. Supplied with screws and absorbent band with double-sided tape. Fittings diameter: 10/12 mm Diameter: 82 mm Height: 280 mm For a continuous flow of water in pressurized systems, installed between the...
Hose connection water filter 12.7 mm Hose connection water filter 12.7 mm 2
5 days of preparation excluding made to order items
Access pumps autom

Hose connection water filter 12.7 mm

N0118523
€7.00
Inspectable water filter with 12.7 mm hose connector Easily washable by unscrewing the transparent lid and pulling out the stainless steel filter Very large enough to insert additional filter materials. Maximum dimensions body and lid 60 x 90 H mm Distance between fixing holes 65 mm; 4.5 mm holes. 1.5 x 1.5 mm mesh To be mounted in line.
Filter for SHURFLO pumps F / M 1/2 connections
5 days of preparation excluding made to order items
Access pumps autom

Filter for SHURFLO pumps F / M 1/2 connections

61141
€28.00
Valvola di ritegno in linea Consente il flusso solo in una direzione. Utile per la protezione contro sbalzi di pressione fino a 6,8 bar. Portagomma da 1/2" (13 mm)
SHURFLO PUMP NOISE REDUCING KIT SHURFLO PUMP NOISE REDUCING KIT 2
5 days of preparation excluding made to order items
Access pumps autom

SHURFLO PUMP NOISE REDUCING KIT

300/178
€18.90
NOISE REDUCING KIT FOR SHURFLO PUMP For all LILIE, LILIE by SHURflo pumps (except SMART series). Reduces sound transmission from pump to vehicle as it is rubber mounted. The pump is simply connected. Secured by self-locking nuts. The pump is secured to the vehicle with drive-in nuts. The set contains assembly instructions and 4 vibration dampers,...
Shurflo Pump Filter F 1/2 inch - PG Ø 12 mm Shurflo Pump Filter F 1/2 inch - PG Ø 12 mm 2
5 days of preparation excluding made to order items
Access pumps autom

Shurflo Pump Filter F 1/2 inch - PG Ø 12 mm

300/127
€9.90
Filter for Shurflo and Lilie pumps F 1/2" (15 x 21) - hose connection Ø 12 mm F 1/2 (15 x 21), head diameter 12 mm. Easily washable by unscrewing the transparent lid and removing the stainless steel filter
Fitting for pump 1 / 2-14NPT (F) x 3/8 curved burr "
5 days of preparation excluding made to order items
Access pumps autom

Fitting for pump 1 / 2-14NPT (F) x 3/8 curved burr "

61148
€3.00
Fitting for pump 1/2 "-14NPT (F) x 3/8 curved burr Nylon elbow fitting for 3/8 "(Ø 9.5 / 10.5) flexible hoses Connection suitable for FIAMMA and SHURFLO pumps
Product added to wishlist