Pumps

Showing 25-48 of 72 item(s)

FIAMMA AQUA 8 12V - 10L Pump - 01216B01-

FIAMMA AQUA 8 12V - 10L Pump - 01216B01- 2

5 days of preparation excluding made to order items

FIAMMA pumps and SPARE PARTS

FIAMMA AQUA 8 12V - 10L Pump - 01216B01-

FIAMMA AQUA 8 12V - 10L Pump - 01216B01- Diaphragm pumps, which operate silently. TECHNICAL DATA: Power supply: 12 V Current draw: 3.4 A Flow rate at 0 bar: 10 L/min Noise level: 65/70 dB Pressure switch intervention: 1.5 bar Pressure switch intervention: 21.75 psi Weight: 1,370 kg Automatic start, support vacuum suction. They are equipped...

FIAMMA AQUA 8 12V - 7L pump - ‎01216C01‐

FIAMMA AQUA 8 12V - 7L pump - ‎01216C01‐ 2

5 days of preparation excluding made to order items

FIAMMA pumps and SPARE PARTS

FIAMMA AQUA 8 12V - 7L pump - ‎01216C01‐

61256

€129.90

Pompa Fiamma AQUA 8 12V - 7L - ‎01216C01‐ Aqua 8 è la classica pompa autoadescante con filtro incorporato e con la basetta antivibrazione Silent Plate di serie. Pompe a membrana, il cui funzionamento è silenzioso. Avvio automatico, supporta l'aspirazione a vuoto. Pompa potentissima, può aspirare e pompare acqua a più di 3 metri di altezza. DATI...

Out-of-Stock

FIAMMA pumps and SPARE PARTS

FIAMMA Aqua F 12V - 10L pump

61253

€125.00

Pompa FIAMMA Aqua F 12V - 10L Pompa a membrana per acqua potabile autoadescante, concepita per un flusso costante ed alta portata. Installabile in qualsiasi posizione, può funzionare a secco senza danni. Alimentazione 12 V Assorbimento corrente 1,7 A Portata a 0 bar 10 l/min Rumorosità 52 db Intervento pressostato 1,5 Bar 21,7 Psi Prevalenza...

View

Out-of-Stock

FIAMMA pumps and SPARE PARTS

FIAMMA Aqua F 12V - 13L pump

61254

€160.00

Pompa FIAMMA Aqua F 12V - 13L Pompa a membrana per acqua potabile autoadescante, concepita per un flusso costante ed alta portata. Installabile in qualsiasi posizione, può funzionare a secco senza danni. Alimentazione 12 V Assorbimento corrente 2,5 A Portata a 0 bar 13 l/min Rumorosità 50 db Intervento pressostato 1,5 Bar Intervento pressostao 21,7...

View

5 days of preparation excluding made to order items

Access pumps immers - line

Filter for immersion pumps

0183006.01

€5.00

Filtro per pompe a immersione

Filter for SHURFLO pumps F / M 1/2 connections

5 days of preparation excluding made to order items

Access pumps autom

Filter for SHURFLO pumps F / M 1/2 connections

61141

€28.00

Valvola di ritegno in linea Consente il flusso solo in una direzione. Utile per la protezione contro sbalzi di pressione fino a 6,8 bar. Portagomma da 1/2" (13 mm)

Filter for Shurflo pumps F 1/2- M 1/2 - 255-213

Filter for Shurflo pumps F 1/2- M 1/2 - 255-213 2

5 days of preparation excluding made to order items

Access pumps autom

Filter for Shurflo pumps F 1/2- M 1/2 - 255-213

15935910

€8.40

Replacement filter for Shurflo pumps F 1/2- M 1/2 - 255-213 M 1/2 (15 x 21) - F 1/2 (15 x 21). Easily washable by unscrewing the transparent cover and extracting the stainless steel filter

5 days of preparation excluding made to order items

Access pumps immers - line

FILTER X IN LINE PUMPS JG 12 mm

1830060112

€6.90

FILTER X IN LINE PUMPS JG 12 mm Brand JG Entry John Guest 12 mm Outlet for insertion into the pump shank Dimensions approximately 58 mm, diameter approximately 27 mm

Fitting for pump 1 / 2-14NPT (F) x 1/2 burr curved "

5 days of preparation excluding made to order items

Access pumps autom

Fitting for pump 1 / 2-14NPT (F) x 1/2 burr curved "

61147

€2.90

Fitting for pump 1/2 "-14NPT (F) x 1/2 burr curved Elbow fitting in nylon for 1/2 "(Ø 12.5 / 13.5) flexible hoses Connection suitable for FIAMMA and SHURFLO pumps

Fitting for pump 1 / 2-14NPT (F) x 1/2 straight burr "

5 days of preparation excluding made to order items

Access pumps autom

Fitting for pump 1 / 2-14NPT (F) x 1/2 straight burr "

61145

€2.20

Raccordo x pompa 1/2"-14NPT(F) x 1/2 bava diritto Raccordo dritto in nylon per tubi flessibili 1/2"

Fitting for pump 1 / 2-14NPT (F) x 3/8 curved burr "

5 days of preparation excluding made to order items

Access pumps autom

Fitting for pump 1 / 2-14NPT (F) x 3/8 curved burr "

61148

€3.00

Fitting for pump 1/2 "-14NPT (F) x 3/8 curved burr Nylon elbow fitting for 3/8 "(Ø 9.5 / 10.5) flexible hoses Connection suitable for FIAMMA and SHURFLO pumps

Fitting for pump 1 / 2-14NPT (F) x 3/8 straight burr "

5 days of preparation excluding made to order items

Access pumps autom

Fitting for pump 1 / 2-14NPT (F) x 3/8 straight burr "

61146

€2.90

Fitting for pump 1/2 "-14NPT (F) x 3/8 straight burr Straight nylon fitting for 3/8 "hoses

5 days of preparation excluding made to order items

FIAMMA pumps and SPARE PARTS

FLAME PUMP HEAD UPGRADE KIT 98657-015

61265

€93.00

FLAME PUMP HEAD UPGRADE KIT 98657-015 Flame Code Replacement for pumps S20, SF126 PRO, WATER 8 FROM 7 L / MIN.12V, FROM 7 L / MIN.24V, FROM 10L / MIN. 12V. Supplied without fittings.

5 days of preparation excluding made to order items

Access pumps autom

Hose connection water filter 12.7 mm

N0118523

€7.00

Inspectable water filter with 12.7 mm hose connector Easily washable by unscrewing the transparent lid and pulling out the stainless steel filter Very large enough to insert additional filter materials. Maximum dimensions body and lid 60 x 90 H mm Distance between fixing holes 65 mm; 4.5 mm holes. 1.5 x 1.5 mm mesh To be mounted in line.

Out-of-Stock

Pumps in line

In-line pump 15 l / m 12V REICH

928598

€24.90

In-line pump 15 l / m 12V REICH Ø 48 mm Flow 15 l / min It works on 12 V Pressure 0.5 bar Weight: 0.190 Kg. Cable length: 1000 mm. Power Consumption: 10 - 20W

View

5 days of preparation excluding made to order items

Pumps in line

In-line pump 20 lt / m 12V BARWIG

61008

€41.50

In-line pump 20 l / m 12V BARWIG Su is used outside the tank or as a support for an immersion pump. 12Vdc voltage Maximum flow rate 20 l / m Max pressure 0.4 bar 11 lt Consumption 30/35 W Ø 57 xh 123 mm approximately Distance between fixing holes 68 x 25 mm approx Wiring m length 300 mm approx Hose connector for internal Ø 12 mm tube

LILIE 1/2 inch Male Screw Filter BAVA Female

LILIE 1/2 inch Male Screw Filter BAVA Female 2

5 days of preparation excluding made to order items

Access pumps autom

LILIE 1/2 inch Male Screw Filter BAVA Female

300/295

€10.50

LILIE 1/2 inch Male Screw Filter Female BAVA Screws directly onto pumps. A fine-mesh stainless metal filter prevents damage to the pump and water system. Transparent screw-on filter housing allows easy cleaning and is suitable for drinking water. Wing nut facilitates installation so that the filter remains movable after installation

Out-of-Stock

Access pumps autom

Lilie LP1805 expansion vessel

PMP203

€69.00

Lilie expansion vessel A constant pressure air container with a flexible membrane. The lung pressure is preset to 1.4 bar and can be changed with a bicycle pump. Optimal operation if this value is close to the pump restart pressure. Consistently quiet, with no splashing or pulsating Extended life of the pressurized water diaphragm pump Does not require...

View

LUX-PLUS COMET submersible pump - 19 l / min - 0.85 bar

LUX-PLUS COMET submersible pump - 19 l / min - 0.85 bar 2

5 days of preparation excluding made to order items

Immersion pumps

LUX-PLUS COMET submersible pump - 19 l / min - 0.85 bar

018 1530.78

€23.90

Pompa immersione LUX-PLUS Comet - 12V - 19 l/min - 0.85 bar Utilizzo; camper, barca; adatta anche come pompa di sentina, svuotamento vasche, giochi d'acqua, grazie alla potenza di 35/40 W Ø 65 x 125 mm Flusso 19 l/mn Funziona a 12 VDC Consumo 30/47 W - max 4.0 A Cavo lunghezza 1 mt Prevalenza max 8,5 m - 0.85 bar Ugello per tubo acqua 10/14...

5 days of preparation excluding made to order items

Access pumps immers - line

Non-return valve for immersion pumps

018 3004.53

€4.90

Valvola non ritorno pompe a immersione

Non-return valve for in-line pumps with JG connections

Non-return valve for in-line pumps with JG connections 2

5 days of preparation excluding made to order items

Access pumps immers - line

Non-return valve for in-line pumps with JG connections

018 3008.02.12

€10.90

Non-return valve for in-line pumps - JG connections for 12 mm diameter hose JG brand John Guest 12 mm entry and exit Size 65mm approx, diameter 27mm approx

Non-return valve for submersible pumps JG 12 mm

5 days of preparation excluding made to order items

Access pumps immers - line

Non-return valve for submersible pumps JG 12 mm

1830045312

€7.50

NON-RETURN VALVE FOR IMMERSION PUMPS JG 12 mm Brand JG Entry John Guest 12 mm Outlet for insertion into the shank of the immersion pump Dimensions approximately 58 mm, diameter approximately 27 mm

Pompa a immersione 19 L/min con valvola 2

Out-of-Stock

Immersion pumps

Pompa a immersione 19 L/min con valvola

PMP319

€59.00

REICH - PLUS - 12VDC submersible pump - flow rate 19 L/minute - 1.1 bar - with valve, threaded connection and hose holder. With wiring Weight: 185 grams Body dimensions approx. 45 x 32 mm Total height 155 mm This submersible pump is equipped with a non-return valve to ensure that water does not return to the tank after closing the tap. This means...

View

5 days of preparation excluding made to order items

Automatic pumps

Pompa autoadescante LILIE da 7 lt/min

PMP204

€79.00

CLASSIC LILIE 12V self-priming pump of 7 l/minute with 1/2 inch male connections and curved and straight hose fittings. Equipped with non-return valve and calibratable pressure switch. Factory pressure switch calibration 1.4 bar (adjustable from 1.1 to 2.1) Pressure switch sensitivity for reactivation 1 bar Maximum lifting height 2.5 metres Dimensions 210...

Pumps