- Agency
-
Accessories
-
Waterfall
- Aeration
-
Power
-
Thermal blinds
- PROMOTIONS
-
Air conditioning Heating
-
Kitchen
- Kitchen hoods
- Cooking
- Kitchen accessories
- Kitchen sinks
-
Refrigerators
- Fridge fans
- Dometic Trivalent Fridge
- Dometic Fridge Compressor
- INDELB refrigerators
- Thetford Tr / Comp fridge
- VITRIFRIGO refrigerators
- Aerators for refrigerators
-
Spare parts for refrigerators
- Fridge lighters
- Spare parts for Dometic refrigerators and grills
- Fridge nozzle burners
- Ignition candles fridge
- Fridge hinges
- Refrigerator closures
- Various for fridge
- Interrutt Selett fridge
- Knobs Fridge handles
- Fridge masks
- Shelves for Dometic fridge
- Resistors for fridge
- Fridge panels cards
- Fridge thermostats
- Refrigerator thermocouples
- Gas valves for refrigerators
- FRIGORIFERI A COMPRESSORE MESTIC
- Drains and siphons 1
-
Electricity
-
Cell exteriors
- Luggage box
- Locker door hinges
- Compressors
- Lockers and garages
- Steps
- Squeegee cleaning brushes
- Climbing and towing handles
- Bumpers
- Walls and blockers
-
External bike racks
- External gas bottle holders
- External motorcycle racks
- Roof rack
- East doors and mosquito nets
- Profiles and gaskets
- Rain protection DRIP STOP
- Remove black lines
- External ladders
- Folding roof
-
Verandas
-
Lighting
- Reflectors
- Post lights. trailers
- Auxiliary lights
- Decorative finishes
- Direction indicators
- Automotive bulbs
- Front clearance lights
- Side marker lights
- Rear clearance lights.
- Plate lights
- Front single modules
- Individual post forms
- Multifunction post. complete
- Multif. post. composib.
- Third stop
- Various lights
-
Gas
-
Lighting
-
Cell interior
- Mattresses and beds
-
Multimedia
-
Do it yourself workshop
- Outdoor
- External sockets and spare parts
-
Safety
-
Toilet
-
Vehicle
- External screen printing
- Car body
- Curtain carpet
-
External locks
- Varie
- OUTLET
-
Waterfall
- Spare parts
External thermal CAMPER LOWER blackout 6 mm
€109.00
VAT included
109
Rif: 14922
Thermal blind outside the cabin LOWER part of the CAMPER 6 mm
Available in two fabrics:
- AP/BASE 6 mm of PVC insulation plus PVC
- AP/LUXURY 8 mm of PVC insulation plus anti-tear, reflective and mould-resistant aluminum mesh, edged with 100% polyester tape and waterproofing of the seams.
BULKY TRANSPORT FOR THIS PRODUCT
The external thermal blind is currently the most effective product in both summer and winter. It completely solves the hot/cold problem, even at 20° below zero
It allows you to isolate the cabin and 100% eliminate the annoying condensation that creates inside the glass. Tailor-made for every type of cabin.
The blind is produced in the upper version (glass) and the complete divisible version (glass plus bonnet). Assembly is extremely easy and quick.
The assembly of the upper part is done using elastic bands to be inserted in the upper corners of the doors and in the central part it is done using a tab which will block everything when closed.
The assembly of the lower part takes place using elastic bands to be positioned at the lower corners, the two pieces will join together thanks to the Velcro positioned at the two ends.
They can be conveniently stored in small bags measuring approximately 70x30 cm.
DISCOUNT - MAKE A PURCHASE OF AT LEAST €200
You will immediately get a €10 discount
ITALY - SHIPPING POLICIES
Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)
EUROPE - SHIPPING POLICIES
Shipping from €22.00 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.
UK - MINIMUM ORDER £135
Orders minimum £135, excluding shipping. Customs duties and taxes are the customer's responsibility.
14922
30 Items
Specific References
- EAN13
- 14922
-
Frequently purchased together
12 other products in the same category:
Thermal blind outside the cabin LOWER part of the CAMPER 6 mm
Available in two fabrics:
- AP/BASE 6 mm of PVC insulation plus PVC
- AP/LUXURY 8 mm of PVC insulation plus anti-tear, reflective and mould-resistant aluminum mesh, edged with 100% polyester tape and waterproofing of the seams.
BULKY TRANSPORT FOR THIS PRODUCT
The external thermal blind is currently the most effective product in both summer and winter. It completely solves the hot/cold problem, even at 20° below zero
It allows you to isolate the cabin and 100% eliminate the annoying condensation that creates inside the glass. Tailor-made for every type of cabin.
The blind is produced in the upper version (glass) and the complete divisible version (glass plus bonnet). Assembly is extremely easy and quick.
The assembly of the upper part is done using elastic bands to be inserted in the upper corners of the doors and in the central part it is done using a tab which will block everything when closed.
The assembly of the lower part takes place using elastic bands to be positioned at the lower corners, the two pieces will join together thanks to the Velcro positioned at the two ends.
They can be conveniently stored in small bags measuring approximately 70x30 cm.
