Solar panels accessories

When installing a solar system on your RV, choosing the right accessories is essential to ensure safety and efficiency. Connectors, cable glands and sheaths play a vital role in optimizing energy transfer and protecting the system. At PitStopCamper, you will find a selection of accessories designed to address the specific needs of a mobile environment, ensuring a reliable energy experience during your adventures.

Connectors, Cable Glands and Sheaths: Essential Accessories for Solar Panels in Campers

Solar panel connectors ensure a safe connection between the cables and the photovoltaic system, reducing energy losses and preventing short circuits. Cable glands, on the other hand, allow for a tidy and safe installation, allowing the cables to pass from the roof to the interior of the camper without damaging the bodywork or compromising waterproofing. Protective sheaths offer additional shielding to the cables, protecting them from abrasion, atmospheric agents and UV rays. Investing in high-quality accessories means extending the life of your solar system, improving its efficiency and ensuring maximum safety even during the most demanding trips.

1-way cable passage kit CBE KT1 1-way cable passage kit CBE KT1 2
Solar panels accessories

1-way cable passage kit CBE KT1

93091
€14.40
KIT 1 VIA PASSAGGIO CAVI modello KT1 - CBE per il passaggio cavi di pannelli solari, telecamere, antenne, ecc.. dal tetto Pe guaina diametro 12  mm mod. KTR-G Adatto per tetti di spessore massimo 60mm
5-way cable passage kit CBE KT5 5-way cable passage kit CBE KT5 2
Solar panels accessories

5-way cable passage kit CBE KT5

93079
€17.90
5-WAY CABLE PASSAGE KIT CBE KT5 For the passage of cables of solar panels, cameras, antennas, etc. .. from the roof Suitable for roofs with a maximum thickness of 60mm Dimensions: 120x90x30 mm
Black printed passatetto with 2 holes
Solar panels accessories

Black printed passatetto with 2 holes

PSTB
€7.90
Black printed passatetto with 2 holes Dimensions 9 x 11 xh 4 cm approx Without cable glands
CBE Kit1-20 Cable passage kit 1 way - sheath 2 cables 3... CBE Kit1-20 Cable passage kit 1 way - sheath 2 cables 3... 2
Solar panels accessories

CBE Kit1-20 Cable passage kit 1 way - sheath 2 cables 3 metres

707220
€39.90
CBE Kit1-20 Cable passage kit 1 way - sheath 2 cables 3 metres Complete with sheath L=2m and cables section 6mmq L=3m
CBE KT6 6-way cable passage kit CBE KT6 6-way cable passage kit 2
Solar panels accessories

CBE KT6 6-way cable passage kit

707060
€23.90
CBE KT6 6-way cable passage kit For the passage of cables of photovoltaic modules, cameras, antennas, etc. from the roof. Suitable for the passage of bulky cables and suitable for roofs with a maximum thickness of 60mm.
CBE KT6/C cable gland cover CBE KT6/C cable gland cover 2
Solar panels accessories

CBE KT6/C cable gland cover

707060C
€9.90
CBE KT6/C cable gland cap For the passage of cables of photovoltaic modules, cameras, antennas, etc. from the roof. Suitable for the passage of bulky cables With M32 hole arrangement
Connector for solar panels max 30A
Solar panels accessories

Connector for solar panels max 30A

€1.60
Connector for solar panels max 30A - Male plus female set Maximum voltage 1500 VDC Maximum current 30A An MC4 connector allows one or more solar panels to be connected to the solar charge controller. This MC4 connector allows 1 solar panel to be connected to the controller.
Dome roof pass with fairlead
Solar panels accessories

Dome roof pass with fairlead

933960
€6.90
Dome roof pass with black or white cable guide according to availability This new roof duct has a groove on the inner face for better bonding. It is made of ASA material for better UV resistance. Dimensions: 145 x 138 x 45 mm
FIXING SUPPORTS FOR FOTOV CBE KPFN 530 MM MODULES FIXING SUPPORTS FOR FOTOV CBE KPFN 530 MM MODULES 2
Solar panels accessories

FIXING SUPPORTS FOR FOTOV CBE KPFN 530 MM MODULES

93084
€45.00
FIXING SUPPORTS WITH COVER 530 x 50 x 60 mm for photovoltaic modules The new KFPN supports, made of anodized aluminum and with a modern and aerodynamic design, are specifically designed for the camper-caravan sector. They are easy to install and do not require drilling, as they can be applied with the use of glue. Supplied in pairs KFPN530 kG. 0.45...
FIXING SUPPORTS FOR PHOTOVOLTAIC MODULES CBE KPF 330 MM FIXING SUPPORTS FOR PHOTOVOLTAIC MODULES CBE KPF 330 MM 2
Solar panels accessories

FIXING SUPPORTS FOR PHOTOVOLTAIC MODULES CBE KPF 330 MM

93080
€52.46
SUPPORTI DI FISSAGGIO CON COPERCHIO 330 x 65 x 73 mm per moduli fotovoltaici - CBE KPF-330 I nuovi supporti KFPN, realizzati in alluminio anodizzato e con un design moderno e aerodinamico, sono studiati appositamente per il settore camper-caravan. Sono di facile installazione e non necessitano di forature, in quanto applicabili con l’utilizzo di...
Product added to wishlist