Waterfall

copy of REICH Tubo scarico acque grigie 28x1,5x2 metri... copy of REICH Tubo scarico acque grigie 28x1,5x2 metri... 2
5 days of preparation excluding made to order items
Waste water discharge pipes

copy of REICH Tubo scarico acque grigie 28x1,5x2 metri WATER WATER SYSTEM

61423
€1.90
REICH Clip fixing Grey water drain pipe 28 mm WATER WATER SYSTEM For the construction of the grey water drainage system for recreational vehicles and campers. The Reich system allows, through plug and play components, to quickly and professionally create waste water circuits. It is adopted by many manufacturers who thus save hours and design efficient and...
copy of Rubinetto miscelatore nero cromato con... copy of Rubinetto miscelatore nero cromato con... 2
5 days of preparation excluding made to order items
No microint mixers

copy of Rubinetto miscelatore nero cromato con microinterruttore

018 2218.2j2JGFL
€37.00
COMET Black chrome mixer tap without microswitch with JG pipes. In black and chrome plastic. Complete with two pipes from hose holder to Jhon Guest connection Mounting hole: Ø27mm Measurements: Width 87 mm, Depth 57 mm, Height 40mm (spout folded) Water outlet: hand shower Hot water resistant. Maximum pressure level 1.5 bar. Thread Length: 25mm Thread Ø:...
copy of TANDEM Submersible Pump 12 V Flow 19 L/MIN Reich... copy of TANDEM Submersible Pump 12 V Flow 19 L/MIN Reich... 2
5 days of preparation excluding made to order items
Immersion pumps

copy of TANDEM Submersible Pump 12 V Flow 19 L/MIN Reich - 512-1914411

300/409
€75.00
TANDEM Submersible Pump 12 V Flow 19 L/MIN Reich - 512-1914411 A special feature of this submersible pump developed by REICH is that it is equipped with two pump motors. These guarantee exceptionally high output and pressure and make the TANDEM submersible pump particularly reliable. Even if one of the pump motors fails, the TANDEM continues to operate...
copy of Valvola di scarico LILIE US 3" copy of Valvola di scarico LILIE US 3" 2
5 days of preparation excluding made to order items
VALTERRA

copy of Valvola di scarico LILIE US 3"

300/456
€19.90
VALTERRA US 3" drain valve - 110 x 205 body, 240 with handle x 120 mm thick. Bladex Valve 3" Weight 608 g Outlet with 3" bayonet cap 3" inlet without thread, for gluing Number 3 very robust bayonet hooks, with lock on closure and U-section rubber gasket for a perfect, long-lasting seal.
Curved receptacle for drains with Ø 25 mm rotor - F 11/4 "
5 days of preparation excluding made to order items
Plastic threaded fittings

Curved receptacle for drains with Ø 25 mm rotor - F 11/4 "

RAC50104
€7.50
Rac.curvo con girello Ø 25 mm - F 1"1/4 Compatibile con pilette PIL600 e PIL612
Curved sleeve Ø 10 mm Curved sleeve Ø 10 mm 2
5 days of preparation excluding made to order items
PG sleeves and fittings

Curved sleeve Ø 10 mm

RACC10
€1.20
Manicotto curvo Ø 10 mm
Curved sleeve Ø 12 mm Curved sleeve Ø 12 mm 2
Out-of-Stock
PG sleeves and fittings

Curved sleeve Ø 12 mm

RACC12
€1.20
Manicotto curvo Ø 12 mm
View
Cylindrical fixed chromed shower support
5 days of preparation excluding made to order items
Flex tubes + accessories

Cylindrical fixed chromed shower support

DCC1300P
€3.00
Cylindrical fixed support for hand shower, chromed, for wall fixing. Metallic ABS plastic material Total height approx 50mm Diameter 35mm approx
Defrost probe 12V - 30W - with thermostat Defrost probe 12V - 30W - with thermostat 2
Out-of-Stock
Antifreeze products

Defrost probe 12V - 30W - with thermostat

SON02
€60.00
12V DEFROST PROBE WITH THERMOSTAT Engagement at 5°C and disengagement at 10°C. Dimensions: Ø 18 x 200 mm. Power consumption: 30W. Voltage: 12V It is recommended to install near the drain, in the lower part of the tank. Electric heaters for tanks with a capacity of max 40 L. capable of raising the temperature by 5-10°C (values that depend on the size of...
View
DIN 96 CAP WITH TWO HOLES DIN 96 CAP WITH TWO HOLES 2
5 days of preparation excluding made to order items
Tank accessories

DIN 96 CAP WITH TWO HOLES

018 TAPP-DIN96
€6.00
DIN 96 CAP WITH TWO HOLES Consisting of a threaded part and a perforated part for connections (hole to be enlarged as needed). Replacement for our article 14870, 14872 showers and tanks. Also to install an immersion pump in a tank and to be able to unscrew the cap to fill it without detaching the connections. Internal thread diameter 96 mm. Height...
DIN 96 closure with drain cock / lid DIN 96 closure with drain cock / lid 2
5 days of preparation excluding made to order items
Tank accessories

DIN 96 closure with drain cock / lid

300/010-1
€10.80
DIN 96 closure with drain cock / lid
DIN96 SCREW CAP FOR 13 LITER CANISTER DIN96 SCREW CAP FOR 13 LITER CANISTER 2
5 days of preparation excluding made to order items
Tank accessories

DIN96 SCREW CAP FOR 13 LITER CANISTER

018 TAPP-TAN19L
€4.50

Waterfall

Product added to wishlist