External thermal CAMPER UPPER blackout 6 mm

Thermal blind outside cabin UPPER part CAMPER 6 mm

Available in two fabrics:

• AP/BASE 6 mm of PVC insulation plus PVC
• AP/LUXURY 8 mm of PVC insulation plus anti-tear, reflective and mould-resistant aluminum mesh, edged with 100% polyester tape and waterproofing of the seams.

BULKY SHIPPING FOR THIS PRODUCT

ITEM MADE TO ORDER

The external thermal blind is currently the most effective product in both summer and winter. It completely solves the hot/cold problem, even at 20° below zero

It allows you to isolate the cabin and 100% eliminate the annoying condensation that creates inside the glass. Tailor-made for every type of cabin.

The blind is produced in the upper version (glass) and the complete divisible version (glass plus bonnet). Assembly is extremely easy and quick.

The assembly of the upper part is done using elastic bands to be inserted in the upper corners of the doors and in the central part it is done using a tab which will block everything when closed.

The assembly of the lower part takes place using elastic bands to be positioned at the lower corners, the two pieces will join together thanks to the Velcro positioned at the two ends.

They can be conveniently stored in small bags measuring approximately 70x30 cm.