DEKASEAL MS-2 ADHESIVE SEAL WHITE POLYMER CARTRIDGE 290 ML

€22.90

VAT included

Rif: 14296

DEKASEAL MS-2 POLYMER ADHESIVE SEALANT WHITE CARTRIDGE 290 ML - UV resistant

DEKAsyl MS-2 is the ideal compromise between adhesive and sealant for creating elastic connections between components that also require high adhesive strength (antennas and solar panels on the roof).

DEKAsyl MS-2 glues and seals in a single treatment, does not weaken the material used and does not leave traces of joining elements (screws or similar).

Aluminum
Polyester
GFK (glass fiber reinforced plastic)
PMMA (polymethylmethacrylate abb. PMMA or also acrylic glass) transparent thermoplastic
Compensation of structural tolerances
Glass
Skylights - and windows
Wheel fairings
and much more

DISCOUNT - MAKE A PURCHASE OF AT LEAST €200

You will immediately get a €10 discount

ITALY - SHIPPING POLICIES

Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)

EUROPE - SHIPPING POLICIES

Shipping from €22.00 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.

UK - MINIMUM ORDER £135

Orders minimum £135, excluding shipping. Customs duties and taxes are the customer's responsibility.

Description
Product Details

A repainting of the MS-2 adhesive sealant is possible after the film has formed.

The fields of application and use are many and can be expanded according to needs.

Base material: MS Polymer
Polymerization / Sealing: Moisture
Specific weight: about 1.4 Kg / liter
Skin formation time (20 ° C / 50% rel. LF): approx. 10 minutes
Opening time (20 ° C / 50% rel. LF):
Curing after 24 hours (20 ° C / 50% rel. LF): approx. 3 mm
Shore A hardness (DIN 53505): approx. 55
Volume change (DIN 52451):
Bond strength (physical rheometer MC100): about 300 Pa (Measure the maximum amount of adhesive that can be applied per m² without dripping)
Tensile stress (100%) (DIN 53504 / ISO 37): about 1.7 Mpa
Tensile stress at break (DIN 53504 / ISO 37): approx. 2.6 MPa
Elongation at break (DIN 53504 / ISO 27): approx. 250%.
Shear stress (DIN 53283 / ASTM D1002): approx. 2.5 MPa
Tear strength (DIN 53515 / ISO 34): approx. 16 N / mm
Solvent content: 0%.
Isocyanate content: 0%.
Temperature resistance: from -40 ° C to + 120 ° C
Application temperature: from + 5 ° C to + 35 ° C
Resistance to UV rays and atmospheric agents: excellent