- Agency
-
Accessories
-
Waterfall
- Aeration
-
Power
-
Thermal blinds
- PROMOTIONS
-
Air conditioning Heating
-
Kitchen
- Kitchen hoods
- Cooking
- Kitchen accessories
- Kitchen sinks
-
Refrigerators
- Fridge fans
- Dometic Trivalent Fridge
- Dometic Fridge Compressor
- INDELB refrigerators
- Thetford Tr / Comp fridge
- VITRIFRIGO refrigerators
- Aerators for refrigerators
-
Spare parts for refrigerators
- Fridge lighters
- Spare parts for Dometic refrigerators and grills
- Fridge nozzle burners
- Ignition candles fridge
- Fridge hinges
- Refrigerator closures
- Various for fridge
- Interrutt Selett fridge
- Knobs Fridge handles
- Fridge masks
- Shelves for Dometic fridge
- Resistors for fridge
- Fridge panels cards
- Fridge thermostats
- Refrigerator thermocouples
- Gas valves for refrigerators
- FRIGORIFERI A COMPRESSORE MESTIC
- Drains and siphons 1
-
Electricity
-
Cell exteriors
- Luggage box
- Locker door hinges
- Compressors
- Lockers and garages
- Steps
- Squeegee cleaning brushes
- Climbing and towing handles
- Bumpers
- Walls and blockers
-
External bike racks
- External gas bottle holders
- External motorcycle racks
- Roof rack
- East doors and mosquito nets
- Profiles and gaskets
- Rain protection DRIP STOP
- Remove black lines
- External ladders
- Folding roof
-
Verandas
-
Lighting
-
Gas
-
Lighting
-
Cell interior
- Mattresses and beds
-
Multimedia
-
Do it yourself workshop
- Outdoor
- External sockets and spare parts
-
Safety
-
Toilet
-
Vehicle
- External screen printing
- Car body
- Curtain carpet
-
External locks
- Varie
- OUTLET
-
Waterfall
- Spare parts
copy of CBE PRS300 PWM Charge Regulator 2 batteries 12V-300W
€89.00
VAT included
89
Rif: 16038
CBE PRS300 PWM Charge Regulator 2 batteries 12V-300W
The PRS300 regulator for photovoltaic modules is designed and built with innovative electronic techniques which allow the maximum yield of the photovoltaic modules connected to it.
The regulator is suitable for connecting 12 V photovoltaic modules up to a maximum total power of 300 W and is set up for connecting the PT642 test panel necessary for checking the charge of the photovoltaic modules and the battery voltage.
The PRS300 is capable of charging lead-gel, lead-acid and AGM batteries using the appropriate charge line (selectable with the switch located inside the regulator).
There is a desulphation function which is activated automatically when the battery needs this process. The device has 4 LEDs for signaling:
Battery recharging phase with maximum current until the end of charge voltage is reached
- Constant voltage holding phase
- Wrong electrical connection alarm
- Regulator on (in the absence of sunlight, the regulator switches off automatically
High electrical efficiency and very low heat dissipation characterize the PRS300,
TECHNICAL DATA:
- Rated Voltage: 12V
- Maximum applicable power: 300W
- Number of entrances: 2
- Auto shut-off in the absence of sunlight
- End of charge voltage: 14.1V (Pb) - 14.3V (Gel) - 14.7 (C)
- Holding voltage: 13.5 (Pb) - 13.8 (Gel) - 13.5 (C)
- Number of charging lines: 3
- Battery desulphation: Yes
- Reverse current blocking device: electronic
- Reverse Polarity Protection: Yes
- Protection fuse inside: not necessary
- Test panel connection: PT 642
- Dimensions: 115 x 90 x H 37mm
DISCOUNT - MAKE A PURCHASE OF AT LEAST €200
You will immediately get a €10 discount
ITALY - SHIPPING POLICIES
Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)
EUROPE - SHIPPING POLICIES
Shipping from €22.00 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.
UK - MINIMUM ORDER £135
Orders minimum £135, excluding shipping. Customs duties and taxes are the customer's responsibility.
16038
1 Item
16 other products in the same category:
CBE PRS300 PWM Charge Regulator 2 batteries 12V-300W
The PRS300 regulator for photovoltaic modules is designed and built with innovative electronic techniques which allow the maximum yield of the photovoltaic modules connected to it.
The regulator is suitable for connecting 12 V photovoltaic modules up to a maximum total power of 300 W and is set up for connecting the PT642 test panel necessary for checking the charge of the photovoltaic modules and the battery voltage.
The PRS300 is capable of charging lead-gel, lead-acid and AGM batteries using the appropriate charge line (selectable with the switch located inside the regulator).
There is a desulphation function which is activated automatically when the battery needs this process. The device has 4 LEDs for signaling:
Battery recharging phase with maximum current until the end of charge voltage is reached
- Constant voltage holding phase
- Wrong electrical connection alarm
- Regulator on (in the absence of sunlight, the regulator switches off automatically
High electrical efficiency and very low heat dissipation characterize the PRS300,
TECHNICAL DATA:
- Rated Voltage: 12V
- Maximum applicable power: 300W
- Number of entrances: 2
- Auto shut-off in the absence of sunlight
- End of charge voltage: 14.1V (Pb) - 14.3V (Gel) - 14.7 (C)
- Holding voltage: 13.5 (Pb) - 13.8 (Gel) - 13.5 (C)
- Number of charging lines: 3
- Battery desulphation: Yes
- Reverse current blocking device: electronic
- Reverse Polarity Protection: Yes
- Protection fuse inside: not necessary
- Test panel connection: PT 642
- Dimensions: 115 x 90 x H 37mm
