• New
CBE Charger BC122 Lithium Compatible 22A - NEW
search
  • CBE Charger BC122 Lithium Compatible 22A - NEW
  • CBE Charger BC122 Lithium Compatible 22A - NEW
  • CBE Charger BC122 Lithium Compatible 22A - NEW
  • CBE Charger BC122 Lithium Compatible 22A - NEW
  • CBE Charger BC122 Lithium Compatible 22A - NEW

CBE Charger BC122 Lithium Compatible 22A - NEW

€289.00
VAT included
289

Rif: 16610

CBE Charger BC122 Lithium Compatible 22A - NEW

After market device, with box and various accessories inside.

The BC122 switching is a high-efficiency battery charger (without cooling fan) for lead, gel, lithium and AGM batteries.

Also power supply.

The BC122 from AL-KO VTE eliminates the noise problem at the root: its innovative design and latest-generation components allow charging from the 230V mains at 22A without the need for forced ventilation, thus completely eliminating any operating noise.

Strengths:

  1. Passive dissipation: the absence of fans makes BC122 completely silent
  2. Lightweight and compact design: only 0.8 kg in weight and a small footprint of 145 x 180 x 65 mm "all inclusive" make the device suitable for any vehicle, even minivans.
  3. Versatility: the device manages 4 different charging curves
  4. 100% compatible lithium: BC122 has been designed to give the best with lithium batteries, remaining 100% compatible with lead, Gel and AGM batteries
  5. Easy installation: The BC122 case includes a door to protect the connections, without requiring additional enclosures or junction boxes
  6. Compatibility: BC122 can replace almost all existing chargers, inheriting the original system wiring
  7. Easily integrated: The new BC122 charger can connect digitally to existing AL-KO VTE systems via the CL-BUS protocol and is ready for CI-BUS communication to connect to third-party systems

Batteries must have a nominal voltage of 12V and a capacity adequate for the battery charger current (check the compatibility of the maximum charging current with the technical data sheet of the battery you intend to connect for use). The BC122 also functions as a power supply.

If the battery is present and it is powered by mains voltage, the BC122 functions as a battery charger (if the lithium battery algorithm has been selected, the BC122 functions as a battery charger even if it does not detect the battery when switched on).

Using the dip switch you can choose the charging algorithm depending on the type of battery. When switched on, the green LED flashes to indicate which charging algorithm has been selected via the dip switches.

The charger uses a combination of Constant Current and Constant Voltage charging, this allows to significantly reduce the charging time and not to damage the batteries even if the battery charger is permanently connected to the 230V mains.

When a load is inserted, the battery charger immediately supplies the necessary current, preventing the battery from discharging (this is true if the load current is less than the maximum current that the battery charger can supply; otherwise, the battery will still discharge with a current equal to the difference: (ILOAD - ICHARGE BATTERY). A temperature probe can be connected to the battery charger (to be placed on the battery), to adapt the selected charging algorithm to the battery temperature.

  • Rated voltage 230Vac +-10%
  • Frequency 50Hz+60Hz
  • Maximum power 320W
  • Protection fuse 4A

Output Technical Data:  

  • Maximum current 22A continuous
  • Short Circuit Protection Yes
  • Overload Protection Yes
  • Output Overvoltage Protection Yes
  • Over Temperature Protection Yes
  • Battery Over Temperature Protection Yes
  • Thermal protection Yes (with NTC sensor)
  • Battery type selector Dip Switch
  • Iuou charging line IUoU - AGM / GEL / Pb / LiFePO4
  • Number of charging lines 8
  • Network presence signal (s) 12V (MAX 150mA)

General technical data  

  • Yield 93%
  • Room temperature - 20 ÷ 40° C
  • Internal fan Absent
  • Degree of protection IP 20
  • Connecting to the network 3 pole IEC EN60320 C14
  • Battery connection "M6" screw
  • Size (mm) 146x183x65mm
  • Weight <0.8kg
Quantity

  • TEM ON ORDER WITH DELIVERY TIME TO BE CONFIRMED BY THE MANUFACTURER.

  • The manufacturer's legal guarantee is valid.

  • See our G.C.S.

  DISCOUNT - MAKE A PURCHASE OF AT LEAST €200

You will immediately get a €10 discount

  ITALY - SHIPPING POLICIES

Shipping starting from € 8.90 up to 2 kg and not bulky (sum three sides not exceeding one meter)

  EUROPE - SHIPPING POLICIES

Shipping from €22.00 up to 2 kg and not bulky (sum 3 sides over a meter). Superiors ask quote.

  UK - MINIMUM ORDER £135

Orders minimum £135, excluding shipping. Customs duties and taxes are the customer's responsibility.

16610
1 Item