2D-12 installed air heater with PU22 diesel PLANAR HIGH ALTITUDE KIT

COMPANY NOTES

The main sector of activity of the Advers group of companies is the development and mass production of products under the “Teplostar”, “Planar” and “Binar” brands. These devices ensure reliable operation of means of transport at low temperatures (down to -50 ° С).

The company Planar, sro, Czech Republic distributes the products of the company Advers on the European markets.Planar, sro currently offers the following products:

PRODUCT FEATURES

The 12 VDC Planar 2D is the smallest hot air generator of the Planar series, which allows installation in small vehicles such as VAN and similar.

Thanks to its measurements, the Planar 2 stands up to comparison with heating systems of other brands, thanks to the standard points to fix it and it is possible to replace it with heating systems of other brands, in case the repair is expensive.

It is an economical alternative to the Eberspächer Airtronic D2;everything needed for installation is already included.The hole pattern corresponds to that of the well-known Eberspächer or Webasto heaters, so that it is easy to replace them without having to drill new holes in the body.

This heater comes with a height kit.This means that the heater reduces the injection quantity automatically and according to the ambient air pressure, in order to prevent or drastically reduce the formation of soot in the combustion chamber by decreasing the oxygen content in the air.In proportion to the amount of oxygen in the air, the maximum power of the heating system decreases! Fromthe 2000 m onwards are lost approx.5% power for 500 m of height.

Hot air generators are designed to heat the driver's cab or various other interior spaces of limited volume in vehicles at ambient temperatures as low as -45 ° C.

Kit includes:

• components as per packing list basic model attached AIR 2D 2 KW, with High Altitude kit,
• + PU-22 controller
• + heater fixing plate
• + tube Ø 60, 2 mt
• + fixed nozzles, 2 pcs.
• + assembly, testing, operating instructions.

The mounting set, which is part of the package, contains everything you need to install the heating system on virtually any vehicle.

PU-22 Controller:

The panel is intended for:

• switching on (unlimited) and switching off the operation of the heater in manual mode;
• the selection of the operating mode according to the orientation to "power" or "temperature";
• activation of the "ventilation" mode;
• display of the set temperature or power;
• the display of the temperature of one of the three probes (one integrated in the heater, one integrated in the panel and one external in the cabin - if present);
• the display of the alarm in case of failure of the heating system.

SOME OPTIONALS

• If you prefer to mount the heater outside the vehicle, the stainless steel container for outdoor use must be provided as an extra accessory.
• GSM modem.
• Inside cabin temperature probe
• Dedicated fuel tank

DEVICE POWER AND OBTAINABLE ROOM TEMPERATURE

The internal temperature that can be obtained is a function of the volume of the vehicle, the desired temperature gradient (difference between the outside and the inside) and the conductivity coefficient of the coating with which the space to be heated is created. In case of doubt, ask for verification for the sizing of the system.

NOTE

The representation of the overall system on the display frame is only a demonstrative example and does not represent the product in question.

WIRING:

2067 for controller 1.8 mt

3647 for 9.5 m burner

2061 for pump 6 mt